Introduction To Mechanical Micro Machining : Results have been published
You will be informed via mail and SMS about the release of exam results and e-certificates.
https://docs.google.com/spreadsheets/d/e/2PACX-1vS0P4yTZbjm0iIa5iDSJwzT1ti6j8QnQIcnt7nxbVZ2l2IJUDQbGCVlebfUJPGScEe91jxsw4rA018D/pubhtml
To check the results & see your e-certificate, go to nptelonlinecourses.iitm.ac.
Login with the course enrolled e-mail id.
Clicking on the course name will redirect to the score board.
Click on Exam Scores - Both the Assignment scores and Exam score will be displayed.
Final score is the certification score.
Calculation Logic for each course is provided in the same page.
Once the certificates are printed, reprint of certificates with corrections will be done only by paying additional fees.
Feedback for Introduction To Mechanical Micro Machining
Dear student
We are glad that you have attended the NPTEL online certification course.
We hope you found the NPTEL Online course useful and have started using NPTEL extensively.
In this regard, we would like to have a feedback from you regarding our course and whether there are any improvements, you would like to suggest.
We are enclosing an online feedback form and would request you to spare some of your valuable time to input your observations. Your esteemed input will help us in serving you better.
The link to give your feedback is : http://bit.ly/2Jujltj
We thank you for your valuable time and feedback.
Thanks & Regards,
NPTEL Team
Solution for Week 12 Assignment - Introduction To Mechanical Micro Machining
Dear Learners, Detailed Solution for Assignment 12 is available now in the Course Outline section. Please go through the solution and in case of any doubt post your queries in the forum. Regards Course Admin NPTEL
Week 12 Feedback Form - Introduction To Mechanical Micro Machining
Dear Learners, Thank you for enrolling to this NPTEL course and we hope you have gone through the contents for this week and also attempted the assignment. We value your feedback and wish to know how you found the videos and the questions asked - whether they were easy, difficult, as per your expectations, etc We shall use this to make the course better and we can also know from the feedback which concepts need more explanation, etc. Please do spare some time to give your feedback - comprises just 5 questions - should not take more than a minute, but makes a lot of difference for us as we know what the learners feel. Here is the link to the form: http://nptel.ac.in/noc/nocprofile/super_admin/weekly_feedback/form_login.php Regards Course Admin NPTEL
Best of Luck for your Exam
Dear Learners, Best of luck for your examination!
Regards
Course Admin
NPTEL Team
Introduction To Mechanical Micro Machining: Hall ticket for April 27 & 28, 2019 NPTEL Online Certification exams is now available for download.
Solution for Week 11 Assignment - Introduction To Mechanical Micro Machining
Dear Learners, Detailed Solution for Assignment 11 is available now in the Course Outline section. Please go through the solution and in case of any doubt post your queries in the forum. Regards Course Admin NPTEL
Solution for Week 10 Assignment - Introduction To Mechanical Micro Machining
Dear Learners, Detailed Solution for Assignment 10 is available now in the Course Outline section. Please go through the solution and in case of any doubt post your queries in the forum. Regards Course Admin NPTEL
Week 12 is live now!! - Introduction To Mechanical Micro Machining
Dear students The lecture videos for Week-12 have been uploaded for the course Introduction To Mechanical Micro Machining. The lectures can be accessed using the following link: https://onlinecourses.nptel.ac.in/noc19_me26/unit?unit=94&lesson=95 The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already). Assignment for Week-12 is also uploaded and can be accessed from the following link: https://onlinecourses.nptel.ac.in/noc19_me26/unit?unit=94&assessment=143 The assignment has to be submitted on or before Wednesday, 2019-04-24, 23:59 IST. As we have done so far, please use the discussion forums if you have any questions on this module. -NPTEL Team
Week 11 Feedback Form - Introduction To Mechanical Micro Machining
Dear Learners, Thank you for enrolling to this NPTEL course and we hope you have gone through the contents for this week and also attempted the assignment. We value your feedback and wish to know how you found the videos and the questions asked - whether they were easy, difficult, as per your expectations, etc We shall use this to make the course better and we can also know from the feedback which concepts need more explanation, etc. Please do spare some time to give your feedback - comprises just 5 questions - should not take more than a minute, but makes a lot of difference for us as we know what the learners feel. Here is the link to the form: http://nptel.ac.in/noc/nocprofile/super_admin/weekly_feedback/form_login.php Regards Course Admin NPTEL
Week 11 is live now!! - Introduction To Mechanical Micro Machining
Dear students The lecture videos for Week-11 have been uploaded for the course Introduction To Mechanical Micro Machining. The lectures can be accessed using the following link: https://onlinecourses.nptel.ac.in/noc19_me26/unit?unit=86&lesson=87 The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already). Assignment for Week-11 is also uploaded and can be accessed from the following link: https://onlinecourses.nptel.ac.in/noc19_me26/unit?unit=86&assessment=141 The assignment has to be submitted on or before Wednesday, 2019-04-17, 23:59 IST. As we have done so far, please use the discussion forums if you have any questions on this module. -NPTEL Team
Week 10 Feedback Form - Introduction To Mechanical Micro Machining
Dear Learners, Thank you for enrolling to this NPTEL course and we hope you have gone through the contents for this week and also attempted the assignment. We value your feedback and wish to know how you found the videos and the questions asked - whether they were easy, difficult, as per your expectations, etc We shall use this to make the course better and we can also know from the feedback which concepts need more explanation, etc. Please do spare some time to give your feedback - comprises just 5 questions - should not take more than a minute, but makes a lot of difference for us as we know what the learners feel. Here is the link to the form: http://nptel.ac.in/noc/nocprofile/super_admin/weekly_feedback/form_login.php Regards Course Admin NPTEL
Solution for Week 9 Assignment - Introduction To Mechanical Micro Machining
Dear Learners, Detailed Solution for Assignment 9 is available now in the Course Outline section. Please go through the solution and in case of any doubt post your queries in the forum. Regards Course Admin NPTEL
Introduction To Mechanical Micro Machining : Exam Type and Certificate Format
Dear Candidate
Type of exam: Computer based exam
You will have to appear at the allotted exam center and produce your Hall ticket and Government Photo Identification Card(Example: Driving License, Passport, PAN card, Voter ID, Aadhaar-ID with your Name, date of birth, photograph and signature) for verification and take the exam in person. You can find the allotted exam center details in the hall ticket.
The questions will be on the computer and the answers will have to be entered on the computer; type of questions may include multiple choice questions, fill in the blanks, essay-type answers, etc
The hall ticket will be available for download tentatively around Mid of April 2019. We will notify the same through email.
On-Screen Calculator Demo Link:
Kindly use the below link to get an idea of how the On-screen calculator will work during the exam.
https://tcsion.com/OnlineAssessment/ScientificCalculator/Calculator.html
NOTE: Physical calculators are not allowed inside the exam hall.
FINAL CERTIFICATE:
The final score = 25% assignment score + 75% final certification exam score.
The final score will determine if you will/will not receive a certificate.
1. Final score < 40%: NO certificate
2. Final score between 40% -59%: Certificate of type "Successfully completing the course"
3. Final score between 60% -74%: Certificate with tag "Elite" printed at the top
4. Final score between 75% -89%: Certificate with tag "Elite" tag and "Silver medal" printed at the top
5. Final score of 90% and above: Certificate with "Elite" tag and "gold medal" printed on it.
-NPTEL Admin
Week 9 Feedback Form - Introduction To Mechanical Micro Machining
Dear Learners, Thank you for enrolling to this NPTEL course and we hope you have gone through the contents for this week and also attempted the assignment. We value your feedback and wish to know how you found the videos and the questions asked - whether they were easy, difficult, as per your expectations, etc We shall use this to make the course better and we can also know from the feedback which concepts need more explanation, etc. Please do spare some time to give your feedback - comprises just 5 questions - should not take more than a minute, but makes a lot of difference for us as we know what the learners feel. Here is the link to the form: http://nptel.ac.in/noc/nocprofile/super_admin/weekly_feedback/form_login.php Regards Course Admin NPTEL
Week 10 is live now!! - Introduction To Mechanical Micro Machining
Dear students The lecture videos for Week-10 have been uploaded for the course Introduction To Mechanical Micro Machining. The lectures can be accessed using the following link: https://onlinecourses.nptel.ac.in/noc19_me26/unit?unit=77&lesson=78 The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already). Assignment for Week-10 is also uploaded and can be accessed from the following link: https://onlinecourses.nptel.ac.in/noc19_me26/unit?unit=77&assessment=139 The assignment has to be submitted on or before Wednesday, 2019-04-10, 23:59 IST. As we have done so far, please use the discussion forums if you have any questions on this module. -NPTEL Team
Solution for Week 8 Assignment - Introduction To Mechanical Micro Machining
Dear Learners, Detailed Solution for Assignment 8 is available now in the Course Outline section. Please go through the solution and in case of any doubt post your queries in the forum. Regards Course Admin NPTEL
Week 9 is live now!! - Introduction To Mechanical Micro Machining
Dear students The lecture videos for Week-9 have been uploaded for the course Introduction To Mechanical Micro Machining. The lectures can be accessed using the following link: https://onlinecourses.nptel.ac.in/noc19_me26/unit?unit=69&lesson=70 The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already). Assignment for Week-9 is also uploaded and can be accessed from the following link: https://onlinecourses.nptel.ac.in/noc19_me26/unit?unit=69&assessment=137 The assignment has to be submitted on or before Wednesday, 2019-04-03, 23:59 IST. As we have done so far, please use the discussion forums if you have any questions on this module. -NPTEL Team
Solution for Week 7 Assignment - Introduction To Mechanical Micro Machining
Dear Learners, Detailed Solution for Assignment 7 is available now in the Course Outline section. Please go through the solution and in case of any doubt post your queries in the forum. Regards Course Admin NPTEL
Week 8 Feedback Form - Introduction To Mechanical Micro Machining
Dear Learners, Thank you for enrolling to this NPTEL course and we hope you have gone through the contents for this week and also attempted the assignment. We value your feedback and wish to know how you found the videos and the questions asked - whether they were easy, difficult, as per your expectations, etc We shall use this to make the course better and we can also know from the feedback which concepts need more explanation, etc. Please do spare some time to give your feedback - comprises just 5 questions - should not take more than a minute, but makes a lot of difference for us as we know what the learners feel. Here is the link to the form: http://nptel.ac.in/noc/nocprofile/super_admin/weekly_feedback/form_login.php Regards Course Admin NPTEL
Introduction To Mechanical Micro Machining : Feedback on Text Transcripts (English) of NPTEL videos
Solution for Week 5 Assignment - Introduction To Mechanical Micro Machining
Dear Learners, Detailed Solution for Assignment 5 is available now in the Course Outline section. Please go through the solution and in case of any doubt post your queries in the forum. Regards Course Admin NPTEL
Solution for Week 6 Assignment - Introduction To Mechanical Micro Machining
Dear Learners, Detailed Solution for Assignment 6 is available now in the Course Outline section. Please go through the solution and in case of any doubt post your queries in the forum. Regards Course Admin NPTEL
Week 8 is live now!! - Introduction To Mechanical Micro Machining
Dear students The lecture videos for Week-8 have been uploaded for the course Introduction To Mechanical Micro Machining. The lectures can be accessed using the following link: https://onlinecourses.nptel.ac.in/noc19_me26/unit?unit=61&lesson=62 The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already). Assignment for Week-8 is also uploaded and can be accessed from the following link: https://onlinecourses.nptel.ac.in/noc19_me26/unit?unit=61&assessment=134 The assignment has to be submitted on or before Wednesday, 2019-03-27, 23:59 IST. As we have done so far, please use the discussion forums if you have any questions on this module. -NPTEL Team
Week 7 Feedback Form - Introduction To Mechanical Micro Machining
Dear Learners, Thank you for enrolling to this NPTEL course and we hope you have gone through the contents for this week and also attempted the assignment. We value your feedback and wish to know how you found the videos and the questions asked - whether they were easy, difficult, as per your expectations, etc We shall use this to make the course better and we can also know from the feedback which concepts need more explanation, etc. Please do spare some time to give your feedback - comprises just 5 questions - should not take more than a minute, but makes a lot of difference for us as we know what the learners feel. Here is the link to the form: http://nptel.ac.in/noc/nocprofile/super_admin/weekly_feedback/form_login.php Regards Course Admin NPTEL
Week 7 is live now!! - Introduction To Mechanical Micro Machining
Dear students The lecture videos for Week-7 have been uploaded for the course Introduction To Mechanical Micro Machining. The lectures can be accessed using the following link: https://onlinecourses.nptel.ac.in/noc19_me26/unit?unit=52&lesson=53 The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already). Assignment for Week-7 is also uploaded and can be accessed from the following link: https://onlinecourses.nptel.ac.in/noc19_me26/unit?unit=52&assessment=133 The assignment has to be submitted on or before Wednesday, 2019-03-20, 23:59 IST. As we have done so far, please use the discussion forums if you have any questions on this module. -NPTEL Team
Week 6 Feedback Form - Introduction To Mechanical Micro Machining
Dear Learners, Thank you for enrolling to this NPTEL course and we hope you have gone through the contents for this week and also attempted the assignment. We value your feedback and wish to know how you found the videos and the questions asked - whether they were easy, difficult, as per your expectations, etc We shall use this to make the course better and we can also know from the feedback which concepts need more explanation, etc. Please do spare some time to give your feedback - comprises just 5 questions - should not take more than a minute, but makes a lot of difference for us as we know what the learners feel. Here is the link to the form: http://nptel.ac.in/noc/nocprofile/super_admin/weekly_feedback/form_login.php Regards Course Admin NPTEL
Solution for Week 4 Assignment - Introduction To Mechanical Micro Machining
Dear Learners,
Detailed Solution for Assignment 4 is available now in the Course Outline section. Please go through the solution and in case of any doubt post your queries in the forum.
Regards
Course Admin
NPTEL
Week 5 Feedback Form - Introduction To Mechanical Micro Machining
Dear Learners, Thank you for enrolling to this NPTEL course and we hope you have gone through the contents for this week and also attempted the assignment. We value your feedback and wish to know how you found the videos and the questions asked - whether they were easy, difficult, as per your expectations, etc We shall use this to make the course better and we can also know from the feedback which concepts need more explanation, etc. Please do spare some time to give your feedback - comprises just 5 questions - should not take more than a minute, but makes a lot of difference for us as we know what the learners feel. Here is the link to the form: http://nptel.ac.in/noc/nocprofile/super_admin/weekly_feedback/form_login.php Regards Course Admin NPTEL
Week 6 is live now!! - Introduction To Mechanical Micro Machining
Dear students The lecture videos for Week-6 have been uploaded for the course Introduction To Mechanical Micro Machining. The lectures can be accessed using the following link: https://onlinecourses.nptel.ac.in/noc19_me26/unit?unit=44&lesson=45 The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already). Assignment for Week- 6 is also uploaded and can be accessed from the following link: https://onlinecourses.nptel.ac.in/noc19_me26/unit?unit=44&assessment=127 The assignment has to be submitted on or before Wednesday, 2019-03-13, 23:59 IST. As we have done so far, please use the discussion forums if you have any questions on this module. -NPTEL Team
Introduction To Mechanical Micro Machining: Reminder 2 for Exam Registration - April 28, 2019 exams
For more details, refer the announcement posted earlier on the course.
Solution for Week 3 Assignment - Introduction To Mechanical Micro Machining
Dear Learners, Detailed Solution for Assignment 3 is available now in the Course Outline section. Please go through the solution and in case of any doubt post your queries in the forum. Regards Course Admin NPTEL
Week 4 Feedback Form - Introduction To Mechanical Micro Machining
Dear Learners, Thank you for enrolling to this NPTEL course and we hope you have gone through the contents for this week and also attempted the assignment. We value your feedback and wish to know how you found the videos and the questions asked - whether they were easy, difficult, as per your expectations, etc We shall use this to make the course better and we can also know from the feedback which concepts need more explanation, etc. Please do spare some time to give your feedback - comprises just 5 questions - should not take more than a minute, but makes a lot of difference for us as we know what the learners feel. Here is the link to the form: http://nptel.ac.in/noc/nocprofile/super_admin/weekly_feedback/form_login.php Regards Course Admin NPTEL
Week 5 is live now!! - Introduction To Mechanical Micro Machining
Dear students The lecture videos for Week- 5 have been uploaded for the course Introduction To Mechanical Micro Machining. The lectures can be accessed using the following link: https://onlinecourses.nptel.ac.in/noc19_me26/unit?unit=36&lesson=37 The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already). Assignment for Week-5 is also uploaded and can be accessed from the following link: https://onlinecourses.nptel.ac.in/noc19_me26/unit?unit=36&assessment=126 The assignment has to be submitted on or before Wednesday, 2019-03-06, 23:59 IST. As we have done so far, please use the discussion forums if you have any questions on this module. -NPTEL Team
Solution for Week 1 and Week 2 Assignment - Introduction To Mechanical Micro Machining
Week 3 Feedback Form - Introduction To Mechanical Micro Machining
Dear Learners, Thank you for enrolling to this NPTEL course and we hope you have gone through the contents for this week and also attempted the assignment. We value your feedback and wish to know how you found the videos and the questions asked - whether they were easy, difficult, as per your expectations, etc We shall use this to make the course better and we can also know from the feedback which concepts need more explanation, etc. Please do spare some time to give your feedback - comprises just 5 questions - should not take more than a minute, but makes a lot of difference for us as we know what the learners feel. Here is the link to the form: http://nptel.ac.in/noc/nocprofile/super_admin/weekly_feedback/form_login.php Regards Course Admin NPTEL
Week 4 is live now!! - Introduction To Mechanical Micro Machining
Dear students The lecture videos for Week-4 have been uploaded for the course Introduction To Mechanical Micro Machining. The lectures can be accessed using the following link: https://onlinecourses.nptel.ac.in/noc19_me26/unit?unit=28&lesson=29 The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already). Assignment for Week-4 is also uploaded and can be accessed from the following link: https://onlinecourses.nptel.ac.in/noc19_me26/unit?unit=28&assessment=125 The assignment has to be submitted on or before Wednesday, 2019-02-27, 23:59 IST. As we have done so far, please use the discussion forums if you have any questions on this module. -NPTEL Team
Reg: Assignment 2 question no-8
Dear Learners,
There is change in answer in Assignment 2 question number 8. Hence, as promised, re-evaluation for the assignment will be done shortly. Request you to find your updated scores in Progress tab after re-evaluation.
--NPTEL Team
Week 3 is live now!! - Introduction To Mechanical Micro Machining
Dear students The lecture videos for Week-3 have been uploaded for the course Introduction To Mechanical Micro Machining. The lectures can be accessed using the following link: https://onlinecourses.nptel.ac.in/noc19_me26/unit?unit=21&lesson=22 The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already). Assignment for Week-3 is also uploaded and can be accessed from the following link: https://onlinecourses.nptel.ac.in/noc19_me26/unit?unit=21&assessment=124 The assignment has to be submitted on or before Wednesday, 2019-02-20, 23:59 IST. As we have done so far, please use the discussion forums if you have any questions on this module. -NPTEL Team
Week 2 Feedback Form - Introduction To Mechanical Micro Machining
Dear Learners, Thank you for enrolling to this NPTEL course and we hope you have gone through the contents for this week and also attempted the assignment. We value your feedback and wish to know how you found the videos and the questions asked - whether they were easy, difficult, as per your expectations, etc We shall use this to make the course better and we can also know from the feedback which concepts need more explanation, etc. Please do spare some time to give your feedback - comprises just 5 questions - should not take more than a minute, but makes a lot of difference for us as we know what the learners feel. Here is the link to the form: http://nptel.ac.in/noc/nocprofile/super_admin/weekly_feedback/form_login.php Regards Course Admin NPTEL
Week 2 is live now!! - Introduction To Mechanical Micro Machining
Dear Students, The lecture videos for Week-2 have been uploaded for the course Introduction To Mechanical Micro Machining. The lectures can be accessed using the following link: https://onlinecourses.nptel.ac.in/noc19_me26/unit?unit=13&lesson=14 The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already). Assignment for Week-2 is also uploaded and can be accessed from the following link: https://onlinecourses.nptel.ac.in/noc19_me26/unit?unit=13&assessment=123 The assignment has to be submitted on or before Wednesday, 2019-02-13, 23:59 IST. As we have done so far, please use the discussion forums if you have any questions on this module. -NPTEL Team
Week 1 Feedback Form - Introduction To Mechanical Micro Machining
Dear Learners, Thank you for enrolling to this NPTEL course and we hope you have gone through the contents for this week and also attempted the assignment. We value your feedback and wish to know how you found the videos and the questions asked - whether they were easy, difficult, as per your expectations, etc. We shall use this to make the course better and we can also know from the feedback which concepts need more explanation, etc. Please do spare some time to give your feedback - comprises just 5 questions - should not take more than a minute, but makes a lot of difference for us as we know what the learners feel. Here is the link to the form: http://nptel.ac.in/noc/nocprofile/super_admin/weekly_feedback/form_login.php Regards Course Admin NPTEL
Introduction To Mechanical Micro Machining - Reminder 1: REGISTER TODAY - CERTIFICATION EXAM FORM IS NOW OPEN!
of exam: April 28, 2019
of April 2019. We will confirm the same through an announcement once it is published.
Week 1 assignment is live now!! - Introduction To Mechanical Micro Machining
Dear Learners, The assignment for week 1 is available in the course outline. Link to access the assignment : https://onlinecourses.nptel.ac.in/noc19_me26/unit?unit=5&assessment=122 Due date for the assignment : 2019-02-13, 23:59 IST. Regards Course Admin NPTEL
Reminder: Week 1 videos are live now!! - Introduction To Mechanical Micro Machining
Dear Learners, The video content for week 1 is made available early for viewing to get an idea about the content but the actual start date remains unchanged. Happy learning! Regards Course Admin NPTEL
Week 1 videos are live now!! - Introduction To Mechanical Micro Machining
Dear Learners, The video content for week 1 is made available early for viewing to get an idea about the content but the actual start date remains unchanged. Happy learning! Regards Course Admin NPTEL
ASSIGNMENT-0-RELEASED - Introduction To Mechanical Micro Machining
Dear Learners, We welcome you all to this course. The assignment 0 has been released. This assignment is based on prerequisite of the course. Kindly note that marks obtained in this assignment will not be considered for the final assessment. You can find the assignment under Week 0 unit on the left-hand side of your screen You can submit the assignment multiple times before the due date. All the best !! Regards Course Admin NPTEL
Introduction To Mechanical Micro Machining - REGISTER TODAY - CERTIFICATION EXAM FORM IS NOW OPEN!
Welcome to NPTEL Online Course: Introduction to Mechanical Micro Machining
- The announcement list which will only have messages from course instructors and teaching assistants - regarding the lessons, assignments, exam registration, hall tickets etc.
- The discussion forum which is for everyone to ask questions and interact, the course instructor/TA will respond to your queries.
- If you have any questions regarding the exam, registration, hall tickets, results, queries related to the technical content in the lectures, any doubts in the assignments, etc can be posted in the forum section
- Date of exams: April 28th 2019 (Sunday).
- Time of Exams:: Morning session 9am to 12 noon; Afternoon session: 2pm to 5pm
- Exam for this course will be available in both morning & afternoon sessions.
- Final List of exam cities will be available in exam registration form.
- Exam registration url - Will be announced shortly.
