Product Design and Manufacturing : Results have been published
Dear Learner,
The results for a few of the April 27/28 exams have been published.
You will be informed via mail and SMS about the release of exam results and e-certificates.
You will be informed via mail and SMS about the release of exam results and e-certificates.
How to find out if results have been published?
To check the publishing status of exam scores and e-certificates, click on this link:
https://docs.google.com/spreadsheets/d/e/2PACX-1vS0P4yTZbjm0iIa5iDSJwzT1ti6j8QnQIcnt7nxbVZ2l2IJUDQbGCVlebfUJPGScEe91jxsw4rA018D/pubhtml
https://docs.google.com/spreadsheets/d/e/2PACX-1vS0P4yTZbjm0iIa5iDSJwzT1ti6j8QnQIcnt7nxbVZ2l2IJUDQbGCVlebfUJPGScEe91jxsw4rA018D/pubhtml
To check the results & see your e-certificate, go to nptelonlinecourses.iitm.ac.
Login with the course enrolled e-mail id.
Clicking on the course name will redirect to the score board.
Click on Exam Scores - Both the Assignment scores and Exam score will be displayed.
Final score is the certification score.
Calculation Logic for each course is provided in the same page.
Reporting of errors
For each course, reporting of issues comes with its own deadline (date and time)So check the exam score/e-certificate as soon as you receive our notification.
Once the certificates are printed, reprint of certificates with corrections will be done only by paying additional fees.
Once the certificates are printed, reprint of certificates with corrections will be done only by paying additional fees.
If you want to lodge any issues about scores/e-certificates, you may do that in the same portal.
If you are unable to see the scores/e-certificates, please write to certification-exam@nptel.
- NPTEL TEAM
Feedback for Product Design and Manufacturing
Dear student
We are glad that you have attended the NPTEL online certification course.
We hope you found the NPTEL Online course useful and have started using NPTEL extensively.
In this regard, we would like to have a feedback from you regarding our course and whether there are any improvements, you would like to suggest.
We are enclosing an online feedback form and would request you to spare some of your valuable time to input your observations. Your esteemed input will help us in serving you better.
The link to give your feedback is : http://bit.ly/2Y8aXD3
We thank you for your valuable time and feedback.
Thanks & Regards,
NPTEL Team
Product Design and Manufacturing - Assignment 12 solution is released
Dear candidates,
The Assignment-12 solution for the course "Product Design and Manufacturing" has been released in the portal, and can be accessed from the following link:
Happy Learning!
Thanks & Regards,
NPTEL Team
Product Design and Manufacturing:- Feedback For Week 11
Dear Learner
Thank you for continuing with the course and hope you are enjoying it.
We would like to know if the expectations with which you joined this course are being met and hence please do take 2 minutes to fill out our weekly feedback form.
It would help us tremendously in gauging the learner experience.
Here is the link to the form: https://nptel.ac.in/noc/nocprofile/super_admin/weekly_feedback/form_login.php
Thank you.
-NPTEL team
Product Design and Manufacturing: Hall ticket for April 27 & 28, 2019 NPTEL Online Certification exams is now available for download.
Dear Candidate:
1. If you have registered and paid successfully for the April 27 & 28, 2019 -NPTEL Online certification exams, your Admit Card/Hall ticket is now available at
https://cdn3.digialm.com/EForms/configuredHtml/885/60153/login.html or http://nptelonlinecourses.iitm.ac.in/
Login with your registered Google-enabled account email id (used to access the course on the portal and used for registering for the exam) and its password to access the link. Click on the download tab under the hall ticket for the April exam, from the link.
2. NOTE: Candidates who are taking the exam in the following cities (Dimapur, Kala Amb, Katra, Banda - AN session, Mainpuri - AN session, Bapatla can download the hall ticket only from the link: http://nptelonlinecourses.iitm.ac.in/
Please try to access both the links to download your hall ticket: if you are not able to find your hall ticket in both the links, kindly write to us at support@nptel.iitm.ac.in
Note that you will be able to log in here, only if you have a valid registration for exams on April 27 & 28, 2019.
Please download hall ticket, take a print out and along with an original ID card, carry it with you to the exam venue (The exam center address is displayed in the hall ticket). Read all instructions given in the admit card/ hall ticket carefully and follow them.
-NPTEL Team
Product Design and Manufacturing - Assignment 11 solution is released
Dear candidates,
The Assignment-11 solution for the course "Product Design and Manufacturing" has been released in the portal, and can be accessed from the following link:
Happy Learning!
Thanks & Regards,
NPTEL Team
Product Design and Manufacturing:- Feedback For Week 10
Dear Learner
Thank you for continuing with the course and hope you are enjoying it.
We would like to know if the expectations with which you joined this course are being met and hence please do take 2 minutes to fill out our weekly feedback form.
It would help us tremendously in gauging the learner experience.
Here is the link to the form: https://nptel.ac.in/noc/nocprofile/super_admin/weekly_feedback/form_login.php
Thank you.
-NPTEL team
Product Design and Manufacturing : Video recording on Interactive session 2
Dear All,
There was an interaction session with some of the students for the course "Product Design and Manufacturing"
The video recording is now available in the portal under the last unit "Interactive session"
Those who are interested can take a look.
Youtube link : https://www.youtube.com/watch?v=xrWMlQcQvXs
-NPTEL Team
Product Design and Manufacturing - Assignment 10 solution is released
Dear candidates,
The Assignment-10 solution for the course "Product Design and Manufacturing" has been released in the portal, and can be accessed from the following link:
Happy Learning!
Thanks & Regards,
NPTEL Team
Product Design and Manufacturing - Week 12 Lectures/Assignment 12 released
Dear students,
The lecture videos for Week-12 have been uploaded for the course Product Design and Manufacturing.
The lectures can be accessed using the following link:
The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already).
Assignment for Week-12 is also uploaded and can be accessed from the following link:
The assignment has to be submitted on or before Wednesday, April 24, 2019.
Happy Learning!
Thanks & Regards,
NPTEL Team
Product Design and Manufacturing :- Live interaction with Course Instructor
Dear learners,
You can interact LIVE with the Course Instructor Prof. J. Ramkumar And Dr. Amandeep Singh , Indian Institute of Technology Kanpur of the
course – “Product Design and Manufacturing".
Date: 14th April 2019
Time: 2 PM.
Link to log in :- https://www.youtube.com/watch?
Please enter your question/s that you would like the instructor to answer in the following Google form
https://forms.gle/7Z3f2bnb3PBj
https://forms.gle/7Z3f2bnb3PBj
You can also ask your doubts during the session through the chat window.
We would also like to have your feedback on the live session. We request you to share your thoughts in the forum soon after the live session.
Happy Learning!
NPTEL Team
Product Design and Manufacturing:- Feedback For Week 9
Dear Learner
Thank you for continuing with the course and hope you are enjoying it.
We would like to know if the expectations with which you joined this course are being met and hence please do take 2 minutes to fill out our weekly feedback form.
It would help us tremendously in gauging the learner experience.
Here is the link to the form: https://nptel.ac.in/noc/nocprofile/super_admin/weekly_feedback/form_login.php
Thank you.
-NPTEL team
Product Design and Manufacturing : Exam Type and Certificate Format
Dear Candidate
Type of exam: Computer based exam
You will have to appear at the allotted exam center and produce your Hall ticket and Government Photo Identification Card(Example: Driving License, Passport, PAN card, Voter ID, Aadhaar-ID with your Name, date of birth, photograph and signature) for verification and take the exam in person. You can find the allotted exam center details in the hall ticket.
The questions will be on the computer and the answers will have to be entered on the computer; type of questions may include multiple choice questions, fill in the blanks, essay-type answers, etc
The hall ticket will be available for download tentatively around Mid of April 2019. We will notify the same through email.
On-Screen Calculator Demo Link:
Kindly use the below link to get an idea of how the On-screen calculator will work during the exam.
https://tcsion.com/OnlineAssessment/ScientificCalculator/Calculator.html
NOTE: Physical calculators are not allowed inside the exam hall.
FINAL CERTIFICATE:
The final score = 25% assignment score + 75% final certification exam score.
The final score will determine if you will/will not receive a certificate.
1. Final score < 40%: NO certificate
2. Final score between 40% -59%: Certificate of type "Successfully completing the course"
3. Final score between 60% -74%: Certificate with tag "Elite" printed at the top
4. Final score between 75% -89%: Certificate with tag "Elite" tag and "Silver medal" printed at the top
5. Final score of 90% and above: Certificate with "Elite" tag and "gold medal" printed on it.
-NPTEL Admin
Product Design and Manufacturing - Assignment 09 solution is released
Dear candidates,
The Assignment-9 solution for the course "Product Design and Manufacturing" has been released in the portal, and can be accessed from the following link:
Happy Learning!
Thanks & Regards,
NPTEL Team
Product Design and Manufacturing - Week 11 Lectures/Assignment 11 released
Dear students,
The lecture videos for Week-11 have been uploaded for the course Product Design and Manufacturing.
The lectures can be accessed using the following link:
The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already).
Assignment for Week-11 is also uploaded and can be accessed from the following link:
The assignment has to be submitted on or before Wednesday, April 17, 2019.
Happy Learning!
Thanks & Regards,
NPTEL Team
Product Design and Manufacturing - Week 10 Lectures/Assignment 10 released
Dear students,
The lecture videos for Week-10 have been uploaded for the course Product Design and Manufacturing.
The lectures can be accessed using the following link:
https://onlinecourses.nptel.ac.in/noc19_me23/unit?unit=65&lesson=82
https://onlinecourses.nptel.ac.in/noc19_me23/unit?unit=65&lesson=82
The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already).
Assignment for Week-10 is also uploaded and can be accessed from the following link:
https://onlinecourses.nptel.ac.in/noc19_me23/unit?unit=65&assessment=115
https://onlinecourses.nptel.ac.in/noc19_me23/unit?unit=65&assessment=115
The assignment has to be submitted on or before Wednesday, April 10, 2019.
Happy Learning!
Thanks & Regards,
NPTEL Team
Product Design and Manufacturing - Assignment 08 solution is released
Dear candidates,
The Assignment-8 solution for the course "Product Design and Manufacturing" has been released in the portal, and can be accessed from the following link:
https://onlinecourses.nptel.ac.in/noc19_me23/unit?unit=57&lesson=122
https://onlinecourses.nptel.ac.in/noc19_me23/unit?unit=57&lesson=122
Happy Learning!
Thanks & Regards,
NPTEL Team
Product Design and Manufacturing - Week 09 Lectures / Assignment 09 released
Dear students,
The lecture videos for Week-09 have been uploaded for the course Product Design and Manufacturing.
The lectures can be accessed using the following link:
The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already).
Assignment for Week-09 is also uploaded and can be accessed from the following link:
The assignment has to be submitted on or before Wednesday, April 03, 2019.
Happy Learning!
Thanks & Regards,
NPTEL Team
Product Design and Manufacturing - Assignment 07 solution is released
Dear candidates,
The Assignment-7 solution for the course "Product Design and Manufacturing" has been released in the portal, and can be accessed from the following link:
Happy Learning!
Thanks & Regards,
NPTEL Team
Product Design and Manufacturing - Week 08 Lectures / Assignment 08 released
Dear students,
The lecture videos for Week-08 have been uploaded for the course Product Design and Manufacturing.
The lectures can be accessed using the following link:
The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already).
Assignment for Week-08 is also uploaded and can be accessed from the following link:
The assignment has to be submitted on or before Wednesday, March 27, 2019.
Happy Learning!
Thanks & Regards,
NPTEL Team
Product Design and Manufacturing - Assignment 06 solution is released
Dear candidates,
The Assignment-6 solution for the course "Product Design and Manufacturing" has been released in the portal, and can be accessed from the following link:
Happy Learning!
Thanks & Regards,
NPTEL Team
Product Design and Manufacturing:- Feedback For Week 8
Dear Learner
Thank you for continuing with the course and hope you are enjoying it.
We would like to know if the expectations with which you joined this course are being met and hence please do take 2 minutes to fill out our weekly feedback form.
It would help us tremendously in gauging the learner experience.
Here is the link to the form: https://nptel.ac.in/noc/nocprofile/super_admin/weekly_feedback/form_login.php
Thank you.
-NPTEL team
Product Design and Manufacturing:- Feedback For Week 7
Dear Learner
Thank you for continuing with the course and hope you are enjoying it.
We would like to know if the expectations with which you joined this course are being met and hence please do take 2 minutes to fill out our weekly feedback form.
It would help us tremendously in gauging the learner experience.
Here is the link to the form: https://nptel.ac.in/noc/nocprofile/super_admin/weekly_feedback/form_login.php
Thank you.
-NPTEL team
Product Design and Manufacturing - Week 07 Lectures / Assignment 07 released
Dear students,
The lecture videos for Week-07 have been uploaded for the course Product Design and Manufacturing.
The lectures can be accessed using the following link:
The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already).
Assignment for Week-07 is also uploaded and can be accessed from the following link:
The assignment has to be submitted on or before Wednesday, March 20, 2019.
Happy Learning!
Thanks & Regards,
NPTEL Team
Product Design and Manufacturing:- Feedback For Week 6
Dear Learner
Thank you for continuing with the course and hope you are enjoying it.
We would like to know if the expectations with which you joined this course are being met and hence please do take 2 minutes to fill out our weekly feedback form.
It would help us tremendously in gauging the learner experience.
Here is the link to the form: https://nptel.ac.in/noc/nocprofile/super_admin/weekly_feedback/form_login.php
Thank you.
-NPTEL team
Product Design and Manufacturing - Assignment 05 solution is released
Dear candidates,
The Assignment-5 solution for the course "Product Design and Manufacturing" has been released in the portal, and can be accessed from the following link:
Happy Learning!
Thanks & Regards,
NPTEL Team
Product Design and Manufacturing:- Feedback For Week 5
Dear Learner
Thank you for continuing with the course and hope you are enjoying it.
We would like to know if the expectations with which you joined this course are being met and hence please do take 2 minutes to fill out our weekly feedback form.
It would help us tremendously in gauging the learner experience.
Here is the link to the form: https://nptel.ac.in/noc/nocprofile/super_admin/weekly_feedback/form_login.php
Thank you.
-NPTEL team
Product Design and Manufacturing : Video recording on Interactive session
Dear All,
There was an interaction session with some of the students for the course "Product Design and Manufacturing"
The video recording is now available in the portal under the last unit "Interactive session"
Those who are interested can take a look.
Youtube link : https://www.youtube.com/watch?v=fK6tR8_q6Rw
-NPTEL Team
Product Design and Manufacturing - Week 06 Lectures / Assignment 06 released
Dear students,
The lecture videos for Week-06 have been uploaded for the course Product Design and Manufacturing.
The lectures can be accessed using the following link:
The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already).
Assignment for Week-06 is also uploaded and can be accessed from the following link:
The assignment has to be submitted on or before Wednesday, March 13, 2019.
Happy Learning!
Thanks & Regards,
NPTEL Team
Product Design and Manufacturing - NPTEL Internship
Dear Participants,
You can learn more about the Internship Programme which we offer, by following the link given below:
Thanks.
NPTEL Team
Product Design and Manufacturing: Reminder 2 for Exam Registration - April 28, 2019 exams
Dear Candidate,
For April 28, 2019 exams
• Certification exam registration URL is: http://nptelonlinecourses.iitm.ac.in/
• Choose an exam session: Forenoon: 9.00 AM -12.00 PM ; Afternoon: 2.00 PM - 5.00 PM
• Choose from the Cities where exam will be conducted: list of exam cities
Exam fees:
• Exam fees : Rs 1100/- per course exam :
If you register (fill and submit completed form) before 18 March 2019 10AM AND pay before 19 March 2019 10AM
• Exam fees: Rs 1500/- per course exam
If you register (fill and submit completed form) before 18 March 2019 BUT have NOT paid the fees till 19 March 2019 10AM
If you register (fill and submit the completed form) after 18 March 2019 10AM
For more details, refer the announcement posted earlier on the course.
Hurry! Don't let go of this opportunity to earn a certificate from IITs/IISc!
Product Design and Manufacturing - Assignment 04 solution is released
Dear candidates,
The Assignment-4 solution for the course "Product Design and Manufacturing" has been released in the portal, and can be accessed from the following link:
Happy Learning!
Thanks & Regards,
NPTEL Team
Product Design and Manufacturing :- Live interaction with Course Instructor
Dear learners,
You can interact LIVE with the Course Instructor Prof. J. Ramkumar , Indian Institute of Technology Kanpur of the
course – “Product Design and Manufacturing".
Date: March 3, 2019
Time: 2 PM.
Link to log in - https://www.youtube.com/watch?v=fK6tR8_q6Rw
Please enter your question/s that you would like the instructor to answer in the following Google form
You can also ask your doubts during the session through the chat window.
We would also like to have your feedback on the live session. We request you to share your thoughts in the forum soon after the live session.
Happy Learning!
NPTEL Team
Product Design and Manufacturing - Week 05 Lectures / Assignment 05 released
Dear students,
The lecture videos for Week-05 have been uploaded for the course Product Design and Manufacturing.
The lectures can be accessed using the following link:
The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already).
Assignment for Week-05 is also uploaded and can be accessed from the following link:
The assignment has to be submitted on or before Wednesday, March 6, 2019.
Happy Learning!
Thanks & Regards,
NPTEL Team
Product Design and Manufacturing:- Feedback For Week 4
Dear Learner
Thank you for continuing with the course and hope you are enjoying it.
We would like to know if the expectations with which you joined this course are being met and hence please do take 2 minutes to fill out our weekly feedback form.
It would help us tremendously in gauging the learner experience.
Here is the link to the form: https://nptel.ac.in/noc/nocprofile/super_admin/weekly_feedback/form_login.php
Thank you.
-NPTEL team
Product Design and Manufacturing - Assignment 03 solution is released
Dear candidates,
The Assignment-3 solution for the course "Product Design and Manufacturing" has been released in the portal, and can be accessed from the following link:
Assignment-3:- https://onlinecourses.nptel.ac.in/noc19_me23/unit?unit=20&lesson=101
Happy Learning!
Thanks & Regards,
NPTEL Team
Product Design and Manufacturing - Week 04 Lectures / Assignment 04 released
Dear students,
The lecture videos for Week-04 have been uploaded for the course Product Design and Manufacturing.
The lectures can be accessed using the following link:
The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already).
Assignment for Week-04 is also uploaded and can be accessed from the following link:
The assignment has to be submitted on or before Wednesday, February 27, 2019.
Happy Learning!
Thanks & Regards,
NPTEL Team
Product Design and Manufacturing - Assignment 01 and 02 solutions are released
The Assignment-1 and Assignment-2 Solution for the course "Product Design and Manufacturing"
has been released in the portal, and can be accessed from the following link:
Happy Learning!
Thanks & Regards,
NPTEL Team
Product Design and Manufacturing:- Feedback For Week 2 And Week 3
Dear Learner
Thank you for continuing with the course and hope you are enjoying it.
We would like to know if the expectations with which you joined this course are being met and hence please do take 2 minutes to fill out our weekly feedback form.
It would help us tremendously in gauging the learner experience.
Here is the link to the form: https://nptel.ac.in/noc/nocprofile/super_admin/weekly_feedback/form_login.php
Thank you.
-NPTEL team
Product Design and Manufacturing - Week 03 Lectures / Assignment - 03 released
Dear students,
The lecture videos for Week-03 have been uploaded for the course Product Design and Manufacturing.
The lectures can be accessed using the following link:
The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already).
Assignment for Week-03 is also uploaded and can be accessed from the following link:
The assignment has to be submitted on or before Wednesday, February 20, 2019.
Happy Learning!
Thanks & Regards,
NPTEL Team
Product Design and Manufacturing - Week 02 Lectures / Assignment-02 Released
Dear students,
The lecture videos for week-2 have been uploaded for the course " Product Design and Manufacturing".
The lectures can be accessed using the following
The other lectures in this week are accessible from the navigation bar to
the left. Please remember to login into the website to view contents (if
you aren't logged in already).
Assignment for week-2 is also uploaded and can be accessed from the following
The assignment has to be submitted on or before Wednesday,
[13/02/2019].
As we have done so far, please use the discussion forums if you have any
questions on this module.
Thanks and Regards,
-NPTEL Team
Product Design and Manufacturing:- Feedback For Week 1
Dear Learners,
Thank you for enrolling to this NPTEL course and we hope you have gone through the contents for this week and also attempted the assignment. We value your feedback and wish to know how you found the videos and the questions asked - whether they were easy, difficult, as per your expectations, etc We shall use this to make the course better and we can also know from the feedback which concepts need more explanation, etc.
Please do spare some time to give your feedback - comprises just 5 questions - should not take more than a minute, but makes a lot of difference for us as we know what the learners feel.
Here is the link to the form:
Regards
Course Admin NPTEL
Product Design and Manufacturing - Week 01 Lectures / Assignment-01 Released
Dear Participants,
The week-01 lectures / Assignment-01 for the course "Product Design and Manufacturing" has been released in the portal.
The last date to submit the assignment is 13/02/2019, 11:59 pm.
Happy Learning!
Thanks & Regards,
NPTEL Team
Product Design and Manufacturing - Reminder 1: REGISTER TODAY - CERTIFICATION EXAM FORM IS NOW OPEN!
Dear Learner,
Here is the much-awaited announcement on registering for the April 2019 certification exam.
1. The registration for the certification exam is open only to students who have enrolled in the course.
2. If you want to register for the exam for this course, login here using the same email id used to enroll to the course.
3. Till the start date of the course, every Monday and Thursday at 5:00 PM, we will sync the enrollment data on the exam form. If you enroll in between, please wait till the nearest Tuesday/Friday 10:00 AM to register for the exam. Once the enrollment is closed, the enrollment data will be completely loaded and you can register any time.
4. Date
of exam: April 28, 2019
of exam: April 28, 2019
• Certification exam registration URL is: http://nptelonlinecourses.iitm.ac.in/
• Choose an exam session: Forenoon: 9.00 AM -12.00 PM ; Afternoon: 2.00 PM - 5.00 PM
• Choose from the Cities where exam will be conducted: list of exam cities
5. Exam fees:
• If you register for exam and pay before March 18, 10:00 AM, Exam fees will be Rs. 1100/- per exam.
• If you register for exam before March 18, 10:00 AM and have not paid or register between March 18, 10:00 & March 22, 10:00 AM, Exam fees will be Rs. 1500/- per exam
6. 50% fee waiver for following categories:
• Students belonging to the SC/ST category: please select Yes for the SC/ST option and upload the correct Community certificate
• Students belonging to the PwD category with more than 40% disability: please select Yes for the option and upload the relevant Disability certificate.
7. Last date for registration: March 22, 2019 10.00 AM (Friday).
8. Mode of payment: Online payment - debit card/credit card/net banking or via SPOC of college (refer to guidelines for “Pay via SPOC” instructions)
9. HALL TICKET: The hall ticket will be available for download tentatively in the mid
of April 2019. We will confirm the same through an announcement once it is published.
of April 2019. We will confirm the same through an announcement once it is published.
10. Final score on certificate: 25% of assignment score + 75% of certification exam score.
Award of certificate: Hard and soft copy of Certificate will be awarded only to those candidates who register for the exam, attend the certificate examination and whose Final score >= 40%
Please check the Announcements section of your course for further details on this.
11. FOR CANDIDATES WHO WOULD LIKE TO WRITE MORE THAN 1 COURSE EXAM:- you can add or delete courses and pay separately – till the date when the exam form closes. Same day of exam – you can write exams for 2 courses in the 2 sessions. Same center will be allocated for both the sessions.
12. Data changes
Following are the data that can be changed once the form is submitted (Last date for data changes: 22 March 2019, 10 AM):
• Data that can be changed in form by candidates themselves: Name, Date of birth, Address, Photo and signature
• Data that can be changed by Email request to us : Course selected, shift, exam city. For changes in this email us at (noc@nptel.iitm.ac.in) giving your Application number, email id and name.
• No changes will be entertained in any details after March 22, 2019 – 10:00 AM.
13. LAST DATE FOR CANCELLING EXAMS and getting a refund: 22 MARCH 2019 10:00 AM.
Thanks & Regards,
NPTEL TEAM
Product Design and Manufacturing: Assignment-00 is released
Dear Participants,
The Assignment-00 for the course "Product Design and Manufacturing" has been released in the portal.
The last date to submit the Assignment-00 is 04/02/2019, 11:59 pm.
Note: Assignment-00 would not be considered in evaluation
Happy Learning!
Thanks & Regards,
NPTEL Team
Product Design and Manufacturing - REGISTER TODAY - CERTIFICATION EXAM FORM IS NOW OPEN!
Dear Learner,
Here is the much-awaited announcement on registering for the April 2019 certification exam.
1. The registration for the certification exam is open only to students who have enrolled in the course.
2. If you want to register for the exam for this course, login here using the same email id used to enroll to the course.
3. Till the start date of the course, every Monday and Thursday at 5:00 PM, we will sync the enrollment data on the exam form. If you enroll in between, please wait till the nearest Tuesday/Friday 10:00 AM to register for the exam. Once the enrollment is closed, the enrollment data will be completely loaded and you can register any time.
4. Date of exam: April 28, 2019
• Certification exam registration URL is: http://nptelonlinecourses.iitm.ac.in/
• Choose an exam session: Forenoon: 9.00 AM -12.00 PM ; Afternoon: 2.00 PM - 5.00 PM
• Choose from the Cities where exam will be conducted: list of exam cities
5. Exam fees:
• If you register for exam and pay before March 18, 10:00 AM, Exam fees will be Rs. 1100/- per exam.
• If you register for exam before March 18, 10:00 AM and have not paid or register between March 18, 10:00 & March 22, 10:00 AM, Exam fees will be Rs. 1500/- per exam
6. 50% fee waiver for following categories:
• Students belonging to the SC/ST category: please select Yes for the SC/ST option and upload the correct Community certificate
• Students belonging to the PwD category with more than 40% disability: please select Yes for the option and upload the relevant Disability certificate.
7. Last date for registration: March 22, 2019 10.00 AM (Friday).
8. Mode of payment: Online payment - debit card/credit card/net banking or via SPOC of college (refer to guidelines for “Pay via SPOC” instructions)
9. HALL TICKET: The hall ticket will be available for download tentatively in the mid of April 2019. We will confirm the same through an announcement once it is published.
10. Final score on certificate: 25% of assignment score + 75% of certification exam score.
Award of certificate: Hard and soft copy of Certificate will be awarded only to those candidates who register for the exam, attend the certificate examination and whose Final score >= 40%
Please check the Announcements section of your course for further details on this.
11. FOR CANDIDATES WHO WOULD LIKE TO WRITE MORE THAN 1 COURSE EXAM:- you can add or delete courses and pay separately – till the date when the exam form closes. Same day of exam – you can write exams for 2 courses in the 2 sessions. Same center will be allocated for both the sessions.
12. Data changes
Following are the data that can be changed once the form is submitted (Last date for data changes: 22 March 2019, 10 AM):
• Data that can be changed in form by candidates themselves: Name, Date of birth, Address, Photo and signature
• Data that can be changed by Email request to us : Course selected, shift, exam city. For changes in this email us at (noc@nptel.iitm.ac.in) giving your Application number, email id and name.
• No changes will be entertained in any details after March 22, 2019 – 10:00 AM.
13. LAST DATE FOR CANCELLING EXAMS and getting a refund: 22 MARCH 2019 10:00 AM.
Thanks & Regards,
NPTEL TEAM
Welcome to NPTEL Online Course: Product Design and Manufacturing
Dear student
Welcome to NPTEL Online Courses and Certification!
Thank you for signing up for our online course "Product Design and Manufacturing". We wish you an enjoyable and informative learning experience.
The course will begin on January 28th 2019. When content is released on the portal, you will get an email alerting you. Please watch the lectures, follow the course regularly and submit all assessments and assignments before the due date. Your regular participation is vital for learning.
We will open registration for the exam soon. A form has to be filled and the certification exam has a fee, which needs to be paid at the time of registration. Everyone who has signed-up for the course, including those who do not register for the exam, will continue to have access to the course contents.
There are two sections on the portal apart from the course content and assignment sections:
- The announcement list which will only have messages from course instructors and teaching assistants - regarding the lessons, assignments, exam registration, hall tickets etc.
- The discussion forum which is for everyone to ask questions and interact, the course instructor/TA will respond to your queries.
- If you have any questions regarding the exam, registration, hall tickets, results, queries related to the technical content in the lectures, any doubts in the assignments, etc can be posted in the forum section
Details regarding the course:
Name of the course: Product Design and Manufacturing
Course duration : 12 weeks
- Date of exams: April 28th 2019 (Sunday).
- Time of Exams:: Morning session 9am to 12 noon; Afternoon session: 2pm to 5pm
- Exam for this course will be available in both morning & afternoon sessions.
- Final List of exam cities will be available in exam registration form.
- Exam registration url - Will be announced shortly.
Once again, thanks for your interest in our online courses and certification. Happy learning.
- NPTEL team
