Joining Technologies for metals : Results have been published
Dear Learner,
The results for a few of the April 27/28 exams have been published.
You will be informed via mail and SMS about the release of exam results and e-certificates.
You will be informed via mail and SMS about the release of exam results and e-certificates.
How to find out if results have been published?
To check the publishing status of exam scores and e-certificates, click on this link:
https://docs.google.com/spreadsheets/d/e/2PACX-1vS0P4yTZbjm0iIa5iDSJwzT1ti6j8QnQIcnt7nxbVZ2l2IJUDQbGCVlebfUJPGScEe91jxsw4rA018D/pubhtml
https://docs.google.com/spreadsheets/d/e/2PACX-1vS0P4yTZbjm0iIa5iDSJwzT1ti6j8QnQIcnt7nxbVZ2l2IJUDQbGCVlebfUJPGScEe91jxsw4rA018D/pubhtml
To check the results & see your e-certificate, go to nptelonlinecourses.iitm.ac.
Login with the course enrolled e-mail id.
Clicking on the course name will redirect to the score board.
Click on Exam Scores - Both the Assignment scores and Exam score will be displayed.
Final score is the certification score.
Calculation Logic for each course is provided in the same page.
Reporting of errors
For each course, reporting of issues comes with its own deadline (date and time)So check the exam score/e-certificate as soon as you receive our notification.
Once the certificates are printed, reprint of certificates with corrections will be done only by paying additional fees.
Once the certificates are printed, reprint of certificates with corrections will be done only by paying additional fees.
If you want to lodge any issues about scores/e-certificates, you may do that in the same portal.
If you are unable to see the scores/e-certificates, please write to certification-exam@nptel.
- NPTEL TEAM
Re-evaluation of the Question no. 2 of Assignment No. 6_Joining Technologies for Metals (NOC19_ME17)
Dear students,
We have found a technical error in Question 2 of Assignment No. 6 solution. So we have re-evaluated the Assignment no.6.
Q. Explosive welding involves
We have found a technical error in Question 2 of Assignment No. 6 solution. So we have re-evaluated the Assignment no.6.
Q. Explosive welding involves
I. One component is accelerated at high velocity towards the other
II. Localized micro level plastic deformation of the faying surfaces
III. Melting of faying surfaces
IV. Joining of pipes
a. I, II, IV
b. I, III and IV
c. I and II
d. II, III and IV
Correction-
Earlier Marked answer- c) I, II
Correct answer- a) I, II, IV
The marks after re-evaluation can be seen in your progress tab.
Regards.
Feedback for Joining Technologies for metals
Dear student
We are glad that you have attended the NPTEL online certification course.
We hope you found the NPTEL Online course useful and have started using NPTEL extensively.
In this regard, we would like to have a feedback from you regarding our course and whether there are any improvements, you would like to suggest.
We are enclosing an online feedback form and would request you to spare some of your valuable time to input your observations. Your esteemed input will help us in serving you better.
The link to give your feedback is : http://bit.ly/2uo5ASm
We thank you for your valuable time and feedback.
Thanks & Regards,
NPTEL Team
Solutions of Week '8', Assignment No. '8' for the course "Joining Technologies for metals"
Dear students,
The solution of Assignment No. '8' and Week '8' for the Course "Joining Technologies for metals" have been uploaded.
Kindly write to us in the "Ask a Question" tab on the forum if you face any difficulties.
You can access the below links:
Solution for Week '8', Assignment '8' : https://drive.google.com/open?id=1igWWai9IGUVjKhhtRfy_kVOW3xE8YEND
Happy learning.
-NPTEL Team
Solutions of Week '7', Assignment No. '7' for the course "Joining Technologies for metals"
Dear students,
The solution of Assignment No. '7' and Week '7' for the Course "Joining Technologies for metals" have been uploaded.
Kindly write to us in the "Ask a Question" tab on the forum if you face any difficulties.
You can access the below links:
Solution for Week '7', Assignment '7' : https://drive.google.com/open?id=1OsmUOdiRPzT-KhP8tX8jxHYhBQunQeLb
Happy learning.
-NPTEL Team
Joining Technologies for metals: Hall ticket for April 27 & 28, 2019 NPTEL Online Certification exams is now available for download.
Dear Candidate:
1. If you have registered and paid successfully for the April 27 & 28, 2019 -NPTEL Online certification exams, your Admit Card/Hall ticket is now available at
https://cdn3.digialm.com/EForms/configuredHtml/885/60153/login.html or http://nptelonlinecourses.iitm.ac.in/
Login with your registered Google-enabled account email id (used to access the course on the portal and used for registering for the exam) and its password to access the link. Click on the download tab under the hall ticket for the April exam, from the link.
2. NOTE: Candidates who are taking the exam in the following cities (Dimapur, Kala Amb, Katra, Banda - AN session, Mainpuri - AN session, Bapatla can download the hall ticket only from the link: http://nptelonlinecourses.iitm.ac.in/
Please try to access both the links to download your hall ticket: if you are not able to find your hall ticket in both the links, kindly write to us at support@nptel.iitm.ac.in
Note that you will be able to log in here, only if you have a valid registration for exams on April 27 & 28, 2019.
Please download hall ticket, take a print out and along with an original ID card, carry it with you to the exam venue (The exam center address is displayed in the hall ticket). Read all instructions given in the admit card/ hall ticket carefully and follow them.
-NPTEL Team
Solutions of Week '6', Assignment No. '6' for the course "Joining Technologies for metals"
Dear students,
The solution of Assignment No. '6' and Week '6' for the Course "Joining Technologies for metals" have been uploaded.
Kindly write to us in the "Ask a Question" tab on the forum if you face any difficulties.
You can access the below links:
Solution for Week '6', Assignment '6' : https://drive.google.com/open?id=1QVeGWcYHg35SM0odpiN_v34c9DUeic2b
Happy learning.
-NPTEL Team
Week '8' Course : "Joining Technologies for metals" Lectures and Assignment released
Dear Students,
Greetings !
The 8th Week of Lectures & Assignment for the NPTEL Course "Joining Technologies for metals" have been released.
There are five Lectures & one Assignment. You can submit the assignment multiple times before the due date.
Last date for submission of Assignment would be on 24/April/2019, 23:59, IST. Since the grading system is fully computerised, late submissions will not be allowed.
Kindly write us in "Ask a Question" tab on the forum if you face any difficulties.
You can access the Course Content & Assignment through the below links:
1. Course URL: https://onlinecourses.nptel.ac.in/noc19_me17/course
2. Assignment URL : https://onlinecourses.nptel.ac.in/noc19_me17/unit?unit=60&assessment=77
Best wishes
- NPTEL Team
Joining Technologies for metals : Video recording on Interactive session
Dear All,
There was an interaction session with some of the students for the course "Joining Technologies for metals"
The video recording is now available in the portal under the last unit "Interactive session"
Those who are interested can take a look.
Youtube link : https://www.youtube.com/watch?v=6IL8biYr7bk&feature=youtu.be
-NPTEL Team
Solutions of Week '5', Assignment No. '5' for the course "Joining Technologies for metals"
Dear students,
The solutions of Assignment No. '5' and Week '5' for the Course "Joining Technologies for metals" have been uploaded.
Kindly write to us in the "Ask a Question" tab on the forum if you face any difficulties.
You can access the below links:
Solution for Week '5', Assignment '5' : https://drive.google.com/open?id=1FQ9lh5G6BTC5MsjL_lxEJ20d9E-XimDK
Happy learning.
-NPTEL Team
Week '7' Course : "Joining Technologies for metals" Lectures and Assignment released.
Dear Students,
Greetings !
The 7th Week of Lectures & Assignment for the NPTEL Course "Joining Technologies for metals" have been released.
There are five Lectures & one Assignment. You can submit the assignment multiple times before the due date.
Last date for submission of Assignment would be on 17/April/2019, 23:59, IST. Since the grading system is fully computerised, late submissions will not be allowed.
Kindly write us in "Ask a Question" tab on the forum if you face any difficulties.
You can access the Course Content & Assignment through the below links:
1. Course URL: https://onlinecourses.nptel.ac.in/noc19_me17/course
2. Assignment URL : https://onlinecourses.nptel.ac.in/noc19_me17/unit?unit=52&assessment=76
Best wishes
- NPTEL Team
Joining Technologies for metals : Exam Type and Certificate Format
Dear Candidate
Type of exam: Computer based exam
You will have to appear at the allotted exam center and produce your Hall ticket and Government Photo Identification Card(Example: Driving License, Passport, PAN card, Voter ID, Aadhaar-ID with your Name, date of birth, photograph and signature) for verification and take the exam in person. You can find the allotted exam center details in the hall ticket.
The questions will be on the computer and the answers will have to be entered on the computer; type of questions may include multiple choice questions, fill in the blanks, essay-type answers, etc
The hall ticket will be available for download tentatively around Mid of April 2019. We will notify the same through email.
On-Screen Calculator Demo Link:
Kindly use the below link to get an idea of how the On-screen calculator will work during the exam.
https://tcsion.com/OnlineAssessment/ScientificCalculator/Calculator.html
NOTE: Physical calculators are not allowed inside the exam hall.
FINAL CERTIFICATE:
The final score = 25% assignment score + 75% final certification exam score.
The final score will determine if you will/will not receive a certificate.
1. Final score < 40%: NO certificate
2. Final score between 40% -59%: Certificate of type "Successfully completing the course"
3. Final score between 60% -74%: Certificate with tag "Elite" printed at the top
4. Final score between 75% -89%: Certificate with tag "Elite" tag and "Silver medal" printed at the top
5. Final score of 90% and above: Certificate with "Elite" tag and "gold medal" printed on it.
-NPTEL Admin
Week '6' Course : "Joining Technologies for metals" Lectures and Assignment released.
Dear Students,
Greetings !
The 6th Week of Lectures & Assignment for the NPTEL Course "Joining Technologies for metals" have been released.
There are five Lectures & one Assignment. You can submit the assignment multiple times before the due date.
Last date for submission of Assignment would be on 10/April/2019, 23:59, IST. Since the grading system is fully computerised, late submissions will not be allowed.
Kindly write us in "Ask a Question" tab on the forum if you face any difficulties.
You can access the Course Content & Assignment through the below links:
1. Course URL: https://onlinecourses.nptel.ac.in/noc19_me17/course
2. Assignment URL : https://onlinecourses.nptel.ac.in/noc19_me17/unit?unit=45&assessment=75
Best wishes
- NPTEL Team
Joining Technologies for metals (noc19-me17) : Live interaction with Course Instructor
Dear learner,
You can interact LIVE with the Course Instructor Prof. D. K. Dwivedi, I.I.T Roorkee of the course "Joining Technologies for metals".
Date: 08/April/2019, (Monday)
Time: 03:00 PM - 04:00 PM (Evening)
Link to login to: https://youtu.be/6IL8biYr7bk
Enter your questions you want Prof. to answer at
https://docs.google.com/forms/d/e/1FAIpQLSdiDQRupM_hG-gG06WYcSzloB1aWM08tGc_OdCvdjwwgEWziA/viewform?usp=pp_url
https://docs.google.com/forms/d/e/1FAIpQLSdiDQRupM_hG-gG06WYcSzloB1aWM08tGc_OdCvdjwwgEWziA/viewform?usp=pp_url
You can also ask your doubts during the session through the chat window...
We would also like to hear from you after the session.
Request you to share your thoughts in the forum.
Learners are encouraged to visit https://nptel.ac.in/noc/livesession.php for updates on the live sessions.
- NPTEL team
Solutions of Week '4', Assignment No. '4' for the course "Joining Technologies for metals".
Dear students,
The solutions of Assignment No. '4' and Week '4' for the Course "Joining Technologies for metals" have been uploaded.
Kindly write to us in the "Ask a Question" tab on the forum if you face any difficulties.
You can access the below links:
Solution for Week '4', Assignment '4' : https://drive.google.com/file/d/16XuEO0DPcb--9N0ILaKgSTcAB5fsFW9G/view?usp=sharing
Happy learning.
-NPTEL Team
Week '5' Course : "Joining Technologies for metals" Lectures and Assignment released.
Dear Students,
Greetings !
The 5th Week of Lectures & Assignment for the NPTEL Course "Joining Technologies for metals" have been released.
There are five Lectures & one Assignment. You can submit the assignment multiple times before the due date.
Last date for submission of Assignment would be on 03/April/2019, 23:59, IST.
Since the grading system is fully computerised, late submissions will not be allowed.
Kindly write us in "Ask a Question" tab on the forum if you face any difficulties.
You can access the Course Content & Assignment through the below links:
2. Assignment URL : https://onlinecourses.nptel.ac.in/noc19_me17/unit?unit=37&assessment=74
Best wishes
- NPTEL Team
Solutions of Week '3', Assignment No. '3' for the course "Joining Technologies for metals"
Dear students,
The solutions of Assignment No. '3' and Week '3' for the Course "Joining Technologies for metals" have been uploaded.
Kindly write to us in the "Ask a Question" tab on the forum if you face any difficulties.
You can access the below links:
Solution for Week '3', Assignment '3' : https://drive.google.com/open?id=1wjkoO90J3dHyxZ3rfy5KbKXQPQBBPlXj
Happy learning.
-NPTEL Team
Solutions of Assignment No.1 and 2 for the course "Joining Technologies for metals"
Dear students,
The solutions of Assignment No. 1 and 2 of Week 1 and Week 2 respectively for the Course "Joining Technologies for metals" have been uploaded.
Kindly write to us in the "Ask a Question" tab on the forum if you face any difficulties.
You can access the below links:
Solution for Week '1', Assignment '1' : https://drive.google.com/file/d/1CIZHyX0QYEmigKZ_KZJTojExHGITpGkb/view?usp=sharing
Solution for Week '2', Assignment '2' : https://drive.google.com/file/d/1SdgeDg-n9ZLgLucDE5M24jeePup6jlgC/view?usp=sharing
Happy learning.
-NPTEL Team
Week '4' Course : "Joining Technologies for metals" Lectures and Assignment released.
Dear Students,
Greetings !
The 4th Week of Lectures & Assignment for the NPTEL Course "Joining Technologies for metals" have been released.
There are five Lectures & one Assignment. You can submit the assignment multiple times before the due date.
Last date for submission of Assignment would be on 27/March/2019, 23:59, IST.
Since the grading system is fully computerised, late submissions will not be allowed.
Kindly write us in "Ask a Question" tab on the forum if you face any difficulties.
You can access the Course Content & Assignment through the below links:
1. Course URL: https://onlinecourses.nptel.ac.in/noc19_me17/course
2. Assignment URL : https://onlinecourses.nptel.ac.in/noc19_me17/unit?unit=30&assessment=73
Best wishes
- NPTEL Team
Week '3' Course : "Joining Technologies for metals" Lectures and Assignment released.
Dear Students,
Greetings !
The 3rd Week of Lectures & Assignment for the NPTEL Course "Joining Technologies for metals" have been released.
There are five Lectures & one Assignment. You can submit the assignment multiple times before the due date.
Last date for submission of Assignment would be on 20/March/2019, 23:59, IST.
Since the grading system is fully computerised, late submissions will not be allowed.
Kindly write us in "Ask a Question" tab on the forum if you face any difficulties.
You can access the Course Content & Assignment through the below links:
1. Course URL: https://onlinecourses.nptel.ac.in/noc19_me17/course
2. Assignment URL : https://onlinecourses.nptel.ac.in/noc19_me17/unit?unit=22&assessment=72
Best wishes
- NPTEL Team
Week '2' Course : "Joining Technologies for metals" Lectures and Assignment released.
Dear Students,
Greetings !
The 2nd Week of Lectures & Assignment for the NPTEL Course "Joining Technologies for metals" have been released.
There are five Lectures & one Assignment. You can submit the assignment multiple times before the due date.
Last date for submission of Assignment would be on 13/March/2019, 23:59, IST.
Since the grading system is fully computerised, late submissions will not be allowed.
Kindly write us in "Ask a Question" tab on the forum if you face any difficulties.
You can access the Course Content & Assignment through the below links:
1. Course URL: https://onlinecourses.nptel.ac.in/noc19_me17/course
2. Assignment URL : https://onlinecourses.nptel.ac.in/noc19_me17/unit?unit=14&assessment=71
Best wishes
- NPTEL Team
Joining Technologies for metals: Reminder 2 for Exam Registration - April 28, 2019 exams
Dear Candidate,
For April 28, 2019 exams
• Certification exam registration URL is: http://nptelonlinecourses.iitm.ac.in/
• Choose an exam session: Forenoon: 9.00 AM -12.00 PM ; Afternoon: 2.00 PM - 5.00 PM
• Choose from the Cities where exam will be conducted: list of exam cities
Exam fees:
• Exam fees : Rs 1100/- per course exam :
If you register (fill and submit completed form) before 18 March 2019 10AM AND pay before 19 March 2019 10AM
• Exam fees: Rs 1500/- per course exam
If you register (fill and submit completed form) before 18 March 2019 BUT have NOT paid the fees till 19 March 2019 10AM
If you register (fill and submit the completed form) after 18 March 2019 10AM
For more details, refer the announcement posted earlier on the course.
Hurry! Don't let go of this opportunity to earn a certificate from IITs/IISc!
Joining Technologies for metals Assignment '1' : Deadline Extended.
Dear learners,
The due date for Assignment '1' has been extended till 13/March/2019, 23:59 IST from 06-03-2019, 23:59 IST
Assignment URL : https://onlinecourses.nptel.ac.in/noc19_me17/unit?unit=6&assessment=70
Best wishes
- NPTEL Team
Joining Technologies for metals - Reminder 1: REGISTER TODAY - CERTIFICATION EXAM FORM IS NOW OPEN!
Dear Learner,
Here is the much-awaited announcement on registering for the April 2019 certification exam.
1. The registration for the certification exam is open only to students who have enrolled in the course.
2. If you want to register for the exam for this course, login here using the same email id used to enroll to the course.
3. Till the start date of the course, every Monday and Thursday at 5:00 PM, we will sync the enrollment data on the exam form. If you enroll in between, please wait till the nearest Tuesday/Friday 10:00 AM to register for the exam. Once the enrollment is closed, the enrollment data will be completely loaded and you can register any time.
4. Date
of exam: April 28, 2019
of exam: April 28, 2019
• Certification exam registration URL is: http://nptelonlinecourses.iitm.ac.in/
• Choose an exam session: Forenoon: 9.00 AM -12.00 PM ; Afternoon: 2.00 PM - 5.00 PM
• Choose from the Cities where exam will be conducted: list of exam cities
5. Exam fees:
• If you register for exam and pay before March 18, 10:00 AM, Exam fees will be Rs. 1100/- per exam.
• If you register for exam before March 18, 10:00 AM and have not paid or register between March 18, 10:00 & March 22, 10:00 AM, Exam fees will be Rs. 1500/- per exam
6. 50% fee waiver for following categories:
• Students belonging to the SC/ST category: please select Yes for the SC/ST option and upload the correct Community certificate
• Students belonging to the PwD category with more than 40% disability: please select Yes for the option and upload the relevant Disability certificate.
7. Last date for registration: March 22, 2019 10.00 AM (Friday).
8. Mode of payment: Online payment - debit card/credit card/net banking or via SPOC of college (refer to guidelines for “Pay via SPOC” instructions)
9. HALL TICKET: The hall ticket will be available for download tentatively in the mid
of April 2019. We will confirm the same through an announcement once it is published.
of April 2019. We will confirm the same through an announcement once it is published.
10. Final score on certificate: 25% of assignment score + 75% of certification exam score.
Award of certificate: Hard and soft copy of Certificate will be awarded only to those candidates who register for the exam, attend the certificate examination and whose Final score >= 40%
Please check the Announcements section of your course for further details on this.
11. FOR CANDIDATES WHO WOULD LIKE TO WRITE MORE THAN 1 COURSE EXAM:- you can add or delete courses and pay separately – till the date when the exam form closes. Same day of exam – you can write exams for 2 courses in the 2 sessions. Same center will be allocated for both the sessions.
12. Data changes
Following are the data that can be changed once the form is submitted (Last date for data changes: 22 March 2019, 10 AM):
• Data that can be changed in form by candidates themselves: Name, Date of birth, Address, Photo and signature
• Data that can be changed by Email request to us : Course selected, shift, exam city. For changes in this email us at (noc@nptel.iitm.ac.in) giving your Application number, email id and name.
• No changes will be entertained in any details after March 22, 2019 – 10:00 AM.
13. LAST DATE FOR CANCELLING EXAMS and getting a refund: 22 MARCH 2019 10:00 AM.
Thanks & Regards,
NPTEL TEAM
Week '1' Assignment '1' for the NPTEL Online Course: "Joining Technologies for metals" has been released
Dear Students,
Welcome to the NPTEL online course on "Joining Technologies for metals".
The Assignment '1' of Week '1' for the NPTEL Course 'Joining Technologies for metals' has been released.
Click the link given below to access the Assignment 1 of Week-1
Last Date for Submission of Assignment would be on 06/March/2019, 23:59 IST.
Kindly write to us in "Ask a Question" tab on the portal if you face any difficulties.
Best wishes
- NPTEL Team
Week-1 Video Lectures have been released of the course: Joining Technologies for metals
Dear Students,
Welcome to the NPTEL online course on "Joining Technologies for metals" taught by Prof. D.K. Dwivedi (IIT-Roorkee)
The video lectures (5 video Lectures) of Week-1 of NPTEL online course on "Joining Technologies for metals" have been released.
Click the link given below to access the Video Lectures of Week-1
https://onlinecourses.nptel.ac.in/noc19_me17/unit?unit=6&lesson=7
If you have any issues/query/doubt please ask us to on "ASK A QUESTION" tab.
You can access the content by login using your registered email id and password.
Happy Learning....!!!
Course: "Joining Technologies for metals" Assignment '0' Zero has been released.
Dear students,
I welcome you all to the course of "Joining Technologies for metals" .
We have added a set of questions as Assignment 0 (Zero) under the head 'How to access the portal' on the website.
This assignment is intended to make you familiarise with the assignment structure and the way of answering them.
This assignment is intended to make you familiarise with the assignment structure and the way of answering them.
Kindly note that Assignment zero is only for practicing purpose and will not be counted for any kind of evaluation.
Last date for submission of Assignment 0 (Zero) would be on February 25, 2019, 23:59 IST.
Kindly write us in "Ask a Question" tab on the forum if you face any difficulties.
Course URL : https://onlinecourses.nptel.ac.in/noc19_me17/course
Course URL : https://onlinecourses.nptel.ac.in/noc19_me17/course
Best wishes
- NPTEL Team
Joining Technologies for metals - REGISTER TODAY - CERTIFICATION EXAM FORM IS NOW OPEN!
Dear Learner,
Here is the much-awaited announcement on registering for the April 2019 certification exam.
1. The registration for the certification exam is open only to students who have enrolled in the course.
2. If you want to register for the exam for this course, login here using the same email id used to enroll to the course.
3. Till the start date of the course, every Monday and Thursday at 5:00 PM, we will sync the enrollment data on the exam form. If you enroll in between, please wait till the nearest Tuesday/Friday 10:00 AM to register for the exam. Once the enrollment is closed, the enrollment data will be completely loaded and you can register any time.
4. Date of exam: April 28, 2019
• Certification exam registration URL is: http://nptelonlinecourses.iitm.ac.in/
• Choose an exam session: Forenoon: 9.00 AM -12.00 PM ; Afternoon: 2.00 PM - 5.00 PM
• Choose from the Cities where exam will be conducted: list of exam cities
5. Exam fees:
• If you register for exam and pay before March 18, 10:00 AM, Exam fees will be Rs. 1100/- per exam.
• If you register for exam before March 18, 10:00 AM and have not paid or register between March 18, 10:00 & March 22, 10:00 AM, Exam fees will be Rs. 1500/- per exam
6. 50% fee waiver for following categories:
• Students belonging to the SC/ST category: please select Yes for the SC/ST option and upload the correct Community certificate
• Students belonging to the PwD category with more than 40% disability: please select Yes for the option and upload the relevant Disability certificate.
7. Last date for registration: March 22, 2019 10.00 AM (Friday).
8. Mode of payment: Online payment - debit card/credit card/net banking or via SPOC of college (refer to guidelines for “Pay via SPOC” instructions)
9. HALL TICKET: The hall ticket will be available for download tentatively in the mid of April 2019. We will confirm the same through an announcement once it is published.
10. Final score on certificate: 25% of assignment score + 75% of certification exam score.
Award of certificate: Hard and soft copy of Certificate will be awarded only to those candidates who register for the exam, attend the certificate examination and whose Final score >= 40%
Please check the Announcements section of your course for further details on this.
11. FOR CANDIDATES WHO WOULD LIKE TO WRITE MORE THAN 1 COURSE EXAM:- you can add or delete courses and pay separately – till the date when the exam form closes. Same day of exam – you can write exams for 2 courses in the 2 sessions. Same center will be allocated for both the sessions.
12. Data changes
Following are the data that can be changed once the form is submitted (Last date for data changes: 22 March 2019, 10 AM):
• Data that can be changed in form by candidates themselves: Name, Date of birth, Address, Photo and signature
• Data that can be changed by Email request to us : Course selected, shift, exam city. For changes in this email us at (noc@nptel.iitm.ac.in) giving your Application number, email id and name.
• No changes will be entertained in any details after March 22, 2019 – 10:00 AM.
13. LAST DATE FOR CANCELLING EXAMS and getting a refund: 22 MARCH 2019 10:00 AM.
Thanks & Regards,
NPTEL TEAM
Welcome to NPTEL Online Course: Joining Technologies for Metals
Dear Student
Welcome to NPTEL Online Courses and Certification!
Thank you for signing up for our online course "Joining Technologies for Metals". We wish you an enjoyable and informative learning experience.
The course will begin on February 25th 2019. When content is released on the portal, you will get an email alerting you. Please watch the lectures, follow the course regularly and submit all assessments and assignments before the due date. Your regular participation is vital for learning.
We will open registration for the exam soon after the course starts. A form has to be filled and the certification exam has a fee, which needs to be paid at the time of registration. Everyone who has signed-up for the course, including those who do not register for the exam, will continue to have access to the course contents.
There are two sections on the portal apart from the course content and assignment sections:
• The announcement list which will only have messages from course instructors and teaching assistants - regarding the lessons, assignments, exam registration, hall tickets etc.
• The discussion forum which is for everyone to ask questions and interact - If you have any questions regarding the technical content in the lectures, any doubts in the assignments or any question related to the exam, registration, hall tickets, results, etc, kindly write about this in the forum and the course instructor/TA will respond to it. Please use this well and participate to benefit from the course.
Details regarding the course:
Name of the course: Joining Technologies for Metals
Course url: https://onlinecourses.nptel.ac.in/noc19_me17/
Course duration : (8 weeks)
Date and Time of Exams: April 28th 2019 (Sunday)
Time of Exams: Morning session 9am to 12 noon; Afternoon session: 2pm to 5pm
Exam for this course will be available in both morning & afternoon sessions.
Final List of exam cities will be available in exam registration form.
Exam registration url - Will be announced shortly
Once again, thank you for your interest in our online courses and certification. Happy learning - NPTEL team.
