Equipment Design: Mechanical Aspects : Results for March 31st exams have been published

Dear Learner,

The results for March 31st exams have been published.
You will be informed via mail and SMS about the release of exam results and e-certificates.

How to find out if results have been published?
To check the publishing status of exam scores and e-certificates, click on this link:
https://docs.google.com/spreadsheets/d/e/2PACX-1vSem585rhcvZ8KyJsL9flP1Qs_-fDAFzfHV44NQ8nWhcH8un2BFVTdPc--EAJDLni8AEYBEjzahKhdl/pubhtml

How to check exam results & e-certificates:
To check the results & see your e-certificate, go to nptelonlinecourses.iitm.ac.in
Login with the course enrolled e-mail id.
Clicking on the course name will redirect to the score board.
Click on Exam Scores - Both the Assignment scores and Exam score will be displayed.
Final score is the certification score.
Calculation Logic for each course is provided in the same page.

Reporting of errors
For each course, reporting of issues comes with its own deadline (date and time)
So check the exam score/e-certificate as soon as you receive our notification.
Once the certificates are printed, reprint of certificates with corrections will be done only by paying additional fees.

If you want to lodge any issues about scores/e-certificates, you may do that in the same portal.
nptelonlinecourses.iitm.ac.in

If you are unable to see the scores/e-certificates, please write to certification-exam@nptel.iitm.ac.in

- NPTEL TEAM

Feedback for Equipment Design: Mechanical Aspects

Dear student

We are glad that you have attended the NPTEL online certification course.

We hope you found the NPTEL Online course useful and have started using NPTEL extensively.

In this regard, we would like to have a feedback from you regarding our course and whether there are any improvements, you would like to suggest.
 
We are enclosing an online feedback form and would request you to spare some of your valuable time to input your observations. Your esteemed input will help us in serving you better.

The link to give your feedback is : http://bit.ly/2FgUVOB



We thank you for your valuable time and feedback.

Thanks & Regards,
NPTEL Team  

Equipment Design: Mechanical Aspects: Hall ticket for March 31, 2019 NPTEL Online Certification exams is now available for download.

Dear Candidate:

1. If you have registered and paid successfully for the MARCH 31 NPTEL Online certification exams, your Admit Card/Hall ticket is now available at http://nptelonlinecourses.iitm.ac.in/

Login with your registered Google-enabled account email id (used to access the course on the portal and used for registering for the exam) and its password to access the link. Click on the download tab under the hall ticket for the March 31 exam, from the link.

2. You can also download it from the alternate link given below:
https://cdn3.digialm.com//EForms/configuredHtml/885/60152/login.html

3. NOTE: Candidates who are taking the exam in the following cities (Aizawl, Dimapur, Imphal, Itanagar, Kala Amb, Katra, Port Blair, Shillong) can download the hall ticket only from the link: http://nptelonlinecourses.iitm.ac.in/

Please try to access both the links to download your hall ticket: if you are not able to find your hall ticket in both the links, kindly write to us at support@nptel.iitm.ac.in
 
Note that you will be able to log in here, only if you have a valid registration for exams on March 31, 2019. 

Please download hall ticket, take a print out and along with an original ID card, carry it with you to the exam venue (The exam center address is displayed in the hall ticket). Read all instructions given in the admit card/ hall ticket carefully and follow them.
 In case you don't get the hall tickets for any particular course, please write to  support@nptel.iitm.ac.in

IMPORTANT:

1. Change of shift, course, exam center, exam city is NOT POSSIBLE.
2. You WILL NOT BE ALLOWED to write the exam if you are showing up at the exam center which is not allocated to you by mistake or by intention.
3. Candidates will not be allowed to write the exam without Hall ticket and proper id proof. Proof on the mobile phones or soft copy of hall ticket is NOT PERMITTED.

On-Screen Calculator Demo Link:

Kindly use the below link to get an idea of how the On-screen calculator will work during the exam.
https://tcsion.com/OnlineAssessment/ScientificCalculator/Calculator.html

NPTEL Team wishes you the very best for the certification exam.

Live Session for Equipment Design: Mechanical Aspects

Due to technical fault the live session ended in that link.Now you can connect in this given link
https://www.youtube.com/watch?v=6wb2zn-tdvM

Equipment Design: Mechanical Aspects : Video recording on Interactive session

Dear All,

There was an interaction session with some of the students for the course "Equipment Design: Mechanical Aspects"

The video recording is now available in the portal under the last unit "Interactive session"

Those who are interested can take a look.


-NPTEL Team

Equipment Design: Mechanical Aspects: Exam Type and Certificate Format

Dear Candidate

Type of exam: Computer based exam 

You will have to appear at the allotted exam center and produce your Hall ticket and Government Photo Identification Card(Example: Driving License, Passport, PAN card, Voter ID, Aadhaar-ID with your Name, date of birth, photograph and signature) for verification and take the exam in person. You can find the allotted exam center details in the hall ticket.

The questions will be on the computer and the answers will have to be entered on the computer; type of questions may include multiple choice questions, fill in the blanks, essay-type answers, etc

The hall ticket will be available for download tentatively around Mid of March 2019. We will notify the same through email.

On-Screen Calculator Demo Link:

Kindly use the below link to get an idea of how the On-screen calculator will work during the exam.

NOTE: Physical calculators are not allowed inside the exam hall.

 FINAL CERTIFICATE:

The final score = 25% assignment score + 75% final certification exam score.

The final score will determine if you will/will not receive a certificate.

1. Final score < 40%: NO certificate

2. Final score between 40% -59%: Certificate of type "Successfully completing the course"

3. Final score between 60% -89%: Certificate with tag "Elite" printed at the top

4. Final score of 90% and above: Certificate with "Elite" tag and the gold medal printed on it.

-NPTEL Admin

Equipment Design: Mechanical Aspects: Week 3- Assignment 1 solution

Dear students

The solution of assignment 1 for week 3 have been uploaded for the course Equipment Design: Mechanical Aspects. The solution can be accessed using the following link:

https://drive.google.com/file/d/1NbdWZNKoIEN_wjPpGAWEH0suphdw3JqH/view?usp=sharing

You can access the content from the home page of the Equipment Design: Mechanical Aspects Course, once you logged in. 

With regards and best wishes

Venkata Ramanaiah
Teaching Assistant

Equipment Design: Mechanical Aspects: Week 4- Assignment 1 solution

Dear students

The solution of assignment 1 for week 4 have been uploaded for the course Equipment Design: Mechanical Aspects. The solution can be accessed using the following link:

https://drive.google.com/file/d/1TfiOpjN4OsLwlTRpNHaW0p1yJn0WA3Vl/view?usp=sharing

You can access the content from the home page of the Equipment Design: Mechanical Aspects Course, once you logged in. 

With regards and best wishes

Venkata Ramanaiah
Teaching Assistant

Equipment Design: Mechanical Aspects: Live interaction with Course Instructor

Dear learner,
You can interact LIVE with the Course Instructor Prof. Shabina Khanam of the course – “Equipment Design: Mechanical Aspects".

Date: 15/03/19(Friday)
Time: 10:00 AM - 11:00 AM
Link to login to: https://www.youtube.com/watch?v=Er0eq2SsfHA

Enter your questions you want Prof. to answer at https://docs.google.com/spreadsheets/d/1YOhOQtevcI-XtjISOvaO0hYrAP7jgGfwCW8UJrciF_U/edit?usp=sharing

You can also ask your doubts during the session through the chat window.

We would also like to hear from you after the session. Request you to share your thoughts in the forum. Learners are encouraged to visit https://nptel.ac.in/noc/livesession.php for updates on the live sessions.

NPTEL team

Equipment Design: Mechanical Aspects - Assignment 3 : Deadline Extended

Dear learners,

The due date for "Assignment 3" has been extended till 2019-02-27, 23:59 IST from 2019-02-20, 23:59 IST
Assignment URL :  https://onlinecourses.nptel.ac.in/noc19_ch14/unit?unit=8&assessment=34

Equipment Design: Mechanical Aspects: Reminder for Exam Registration - March 31, 2019 exams

Dear Candidate,

For March 31, 2019 exams
Last date to fill the exam form: Feb 22, 10:00 AM
Deadline to pay exam fees of Rs. 1500/ course - Feb 22, 5:00 PM

For more details check the previous announcement posted on the course page.

Hurry! Don't let go of this opportunity to earn a certificate from IITs/IISc!

-NPTEL Team

Equipment Design: Mechanical Aspects: Week 1- Assignment 1 solution

Dear students

The solution of assignment 1 for week 1 have been uploaded for the course Equipment Design: Mechanical Aspects. The solution can be accessed using the following link:

https://drive.google.com/open?id=1XWDEDWf8sPGctvkDvUr1IgsJy1OPkUTC

You can access the content from the home page of the Equipment Design: Mechanical Aspects Course, once you logged in. 

With regards and best wishes

Venkata Ramanaiah
Teaching Assistant

Equipment Design: Mechanical Aspects: Week 2- Assignment 1 solution

Dear students

The solution of assignment 1 for week 2 have been uploaded for the course Equipment Design: Mechanical Aspects. The solution can be accessed using the following link:

https://drive.google.com/open?id=1hUUyspIQp7xjsk5O8xXVj7lMGsv-Cgyf

You can access the content from the home page of the Equipment Design: Mechanical Aspects Course, once you logged in. 

With regards and best wishes

Venkata Ramanaiah
Teaching Assistant

Equipment Design: Mechanical Aspects - Week 4 content is released

Dear Students, 

Thank you for signing up for our online course "Equipment Design: Mechanical Aspects". We wish you an enjoyable and informative learning experience. 

Now, we are released the WEEK 4 content of the course. There are total five lectures and one assignment. Go through the lectures and submit the assignment before the submission deadline i.e. 27/02/2019, 23:59. 

You can access the content from the home page of the Equipment Design: Mechanical Aspects Course, once you logged in. 
Go to this link 

https://onlinecourses.nptel.ac.in/noc19_ch14/course 

Then login yourself. Once the page opens please click Week 4 which is under course outline on left side top. 

Also the assignment link is:

https://onlinecourses.nptel.ac.in/noc19_ch14/unit?unit=9&assessment=40

Go through the videos and if you have any queries please feel free to ask in the section: Ask a question

or click the below link:

https://onlinecourses.nptel.ac.in/noc19_ch14/forum 

With regards and best wishes
Venkata Ramanaiah
Teaching Assistant

Minor correction in Week 1 Assignment

Dear Students, 

Thank you for signing up for our online course "Equipment Design: Mechanical Aspects". We wish you an enjoyable and informative learning experience. 

In Week 1 Assignment Question no. 20 it is not mentioned what to calculate.
Please consider it as: Determine the thickness of shell.

Q. No-20: A pressure vessel with outer diameter of 3 and length of 20m is to be operated at maximum working pressure of 1.2 MN/m2 (g). The vessel is made of IS 2002-1962 Grade 2B and its design temperature is 475°C. Corrosion allowance is 2mm. It is Class 2 vessel having single welded butt joint with backing strip is used. Determine the thickness of shell.

With regards and best wishes
Venkata Ramanaiah
Teaching Assistant

IS 2825-1969 Code

Dear participants,

As per the requisition from many students the code 2825-1969 is uploaded in the site (check Week 1 lectures). Link is also provided below.
You can download it and can refer accordingly.

https://onlinecourses.nptel.ac.in/noc19_ch14/unit?unit=6&lesson=39

Thank you

Regards,
Venkata Ramanaiah
TA

Equipment Design: Mechanical Aspects - Week 3 content is released

Dear Students, 

Thank you for signing up for our online course "Equipment Design: Mechanical Aspects". We wish you an enjoyable and informative learning experience. 

Now, we are released the WEEK 3 content of the course. There are total five lectures and one assignment. Go through the lectures and submit the assignment before the submission deadline i.e. 20/02/2019, 23:59. 

You can access the content from the home page of the Equipment Design: Mechanical Aspects Course, once you logged in. 
Go to this link 

https://onlinecourses.nptel.ac.in/noc19_ch14/course 

Then login yourself. Once the page opens please click Week 3 which is under course outline on left side top. 

Also the assignment link is:

https://onlinecourses.nptel.ac.in/noc19_ch14/unit?unit=8&assessment=34
Go through the videos and if you have any queries please feel free to ask in the section: Ask a question

or click the below link:

https://onlinecourses.nptel.ac.in/noc19_ch14/forum 

With regards and best wishes
Venkata Ramanaiah
Teaching Assistant

Equipment Design: Mechanical Aspects - Week 2 content is released

Dear Students, 

Thank you for signing up for our online course "Equipment Design: Mechanical Aspects". We wish you an enjoyable and informative learning experience. 

Now, we are released the WEEK 2 content of the course. There are total five lectures and one assignment. Go through the lectures and submit the assignment before the submission deadline i.e. 13/02/2019, 23:59. 

You can access the content from the home page of the Equipment Design: Mechanical Aspects Course, once you logged in. 
Go to this link 

https://onlinecourses.nptel.ac.in/noc19_ch14/course 

Then login yourself. Once the page opens please click Week 2 which is under course outline on left side top. 

Also the assignment link is:

https://onlinecourses.nptel.ac.in/noc19_ch14/unit?unit=7&assessment=33
Go through the videos and if you have any queries please feel free to ask in the section: Ask a question

or click the below link:

https://onlinecourses.nptel.ac.in/noc19_ch14/forum 

With regards and best wishes
Venkata Ramanaiah
Teaching Assistant

Equipment Design: Mechanical Aspects - Reminder 1: REGISTER TODAY - CERTIFICATION EXAM FORM IS NOW OPEN!

Dear Learner, 

Here is the much-awaited announcement on registering for the March 2019 certification exam.
 
1.    The registration for the certification exam is open only to students who have enrolled in the course.

2.    If you want to register for the exam for this course, login here using the same email id used to enroll to the course. 

3.    Till the start date of the course, every Monday and Thursday at 5:00 PM, we will sync the enrollment data on the exam form. If you enroll in between, please wait till the nearest Tuesday/Friday 10:00 AM to register for the exam. Once the enrollment is closed, the enrollment data will be completely loaded and you can register any time.

4.    Date
of exam: March 31, 2019  
•         Certification exam registration URL is: http://nptelonlinecourses.iitm.ac.in/
•         Choose an exam session: Forenoon: 9.00 AM -12.00 PM ; Afternoon: 2.00 PM - 5.00 PM
•         Choose from the Cities where exam will be conducted:  list of exam cities
5.    Exam fees:
•         If you register for exam and pay before Feb 18, 10:00 AM, Exam fees will be Rs. 1100/- per exam.
•         If you register for exam before Feb 18 10:00 AM and have not paid or register between Feb 18, 10:00 AM & Feb 22, 10:00 AM, Exam fees will be Rs. 1500/- per exam
 
6.    50% fee waiver for following categories:
•         Students belonging to the SC/ST category: please select Yes for the SC/ST option and upload the correct Community certificate
•         Students belonging to the PwD category with more than 40% disability: please select Yes for the option and upload the relevant Disability certificate.
 
7.    Last date for registration:  February
22, 2019 10.00 AM (Friday).
 
8.    Mode of payment:  Online payment - debit card/credit card/net banking or via SPOC of college (refer to guidelines for “Pay via SPOC” instructions)
 
9.    HALL TICKET: The hall ticket will be available for download tentatively in the mid
of March 2019. We will confirm the same through an announcement once it is published.
 
10. Final score on certificate: 25% of assignment score + 75% of certification exam score.
Award of certificate:  Hard and soft copy of Certificate will be awarded only to those candidates who register for the exam, attend the certificate examination and whose Final score >= 40%
Please check the Announcements section of your course for further details on this. 
 
11. FOR CANDIDATES WHO WOULD LIKE TO WRITE MORE THAN 1 COURSE EXAM:- you can add or delete courses and pay separately – till the date when the exam form closes. Same day of exam – you can write exams for 2 courses in the 2 sessions. Same center will be allocated for both the sessions.
 
12. Data changes
 
Following are the data that can be changed once the form is submitted (Last date for data changes: 22 February 2019, 10:00 AM):
•        Data that can be changed in form by candidates themselves: Name, Date of birth, Address, Photo and signature
•        Data that can be changed by Email request to us : Course selected, shift, exam city. For changes in this email us at (noc@nptel.iitm.ac.in) giving your Application number, email id and name. 
•        No changes will be entertained in any details after February 22, 2019 – 10:00 AM.
 
13. LAST DATE FOR CANCELLING EXAMS and getting a refund: 22 FEBRUARY 2019 10:00 AM.

Thanks & Regards,
NPTEL TEAM

Announcement for the release of Assignment 0 for the course Equipment Design: Mechanical Aspects

Dear Students, 

Welcome to the NPTEL course on 'Equipment Design: Mechanical Aspects'. 

For a prior experience to the assignments that one need to submit online during the course run and to self-assess your readiness for the course, Assignment 0 is released. 

The assignment 0 is released. The marks obtained for this assignment won't be counted towards the final score. It is only for awareness and to have prior experience. 

If you have any queries please feel free to ask and discuss in the discussion forum on the course web portal. I hope you will have a wonderful journey through this course.  

Warm regards

Venkata Ramanaiah
Teaching Assistant

Equipment Design: Mechanical Aspects - Week 1 content is released

Dear Students, 

Thank you for signing up for our online course "Equipment Design: Mechanical Aspects". We wish you an enjoyable and informative learning experience. 

Now, we are released the WEEK 1 content of the course. There are total five lectures and one assignment. Go through the lectures and submit the assignment before the submission deadline i.e. 13/02/2019, 23:59. 

You can access the content from the home page of the Equipment Design: Mechanical Aspects Course, once you logged in. 
Go to this link 

https://onlinecourses.nptel.ac.in/noc19_ch14/course 

Then login yourself. Once the page opens please click Week 1 which is under course outline on left side top. 

Also the assignment link is:

https://onlinecourses.nptel.ac.in/noc19_ch14/unit?unit=6&assessment=32
Go through the videos and if you have any queries please feel free to ask in the section: Ask a question

or click the below link:

https://onlinecourses.nptel.ac.in/noc19_ch14/forum 

With regards and best wishes
Venkata Ramanaiah
Teaching Assistant

Equipment Design: Mechanical Aspects : REGISTER TODAY - CERTIFICATION EXAM FORM IS NOW OPEN!

Dear Learner, 

Here is the much-awaited announcement on registering for the March 2019 certification exam.
 
1.    The registration for the certification exam is open only to students who have enrolled in the course.

2.    If you want to register for the exam for this course, login here using the same email id used to enroll to the course. 

3.    Till the start date of the course, every Monday and Thursday at 5:00 PM, we will sync the enrollment data on the exam form. If you enroll in between, please wait till the nearest Tuesday/Friday 10:00 AM to register for the exam. Once the enrollment is closed, the enrollment data will be completely loaded and you can register any time.

4.    Date of exam: March 31, 2019  
•         Certification exam registration URL is: http://nptelonlinecourses.iitm.ac.in/
•         Choose an exam session: Forenoon: 9.00 AM -12.00 PM ; Afternoon: 2.00 PM - 5.00 PM
•         Choose from the Cities where exam will be conducted:  list of exam cities
5.    Exam fees:
•         If you register for exam and pay before Feb 18, 10:00 AM, Exam fees will be Rs. 1100/- per exam.
•         If you register for exam before Feb 18 10:00 AM and have not paid or register between Feb 18, 10:00 AM & Feb 22, 10:00 AM, Exam fees will be Rs. 1500/- per exam
 
6.    50% fee waiver for following categories:
•         Students belonging to the SC/ST category: please select Yes for the SC/ST option and upload the correct Community certificate
•         Students belonging to the PwD category with more than 40% disability: please select Yes for the option and upload the relevant Disability certificate.
 
7.    Last date for registration:  February 22, 2019 10.00 AM (Friday).
 
8.    Mode of payment:  Online payment - debit card/credit card/net banking or via SPOC of college (refer to guidelines for “Pay via SPOC” instructions)
 
9.    HALL TICKET: The hall ticket will be available for download tentatively in the mid of March 2019. We will confirm the same through an announcement once it is published.
 
10. Final score on certificate: 25% of assignment score + 75% of certification exam score.
Award of certificate:  Hard and soft copy of Certificate will be awarded only to those candidates who register for the exam, attend the certificate examination and whose Final score >= 40%
Please check the Announcements section of your course for further details on this. 
 
11. FOR CANDIDATES WHO WOULD LIKE TO WRITE MORE THAN 1 COURSE EXAM:- you can add or delete courses and pay separately – till the date when the exam form closes. Same day of exam – you can write exams for 2 courses in the 2 sessions. Same center will be allocated for both the sessions.
 
12. Data changes
 
Following are the data that can be changed once the form is submitted (Last date for data changes: 22 February 2019, 10:00 AM):
•        Data that can be changed in form by candidates themselves: Name, Date of birth, Address, Photo and signature
•        Data that can be changed by Email request to us : Course selected, shift, exam city. For changes in this email us at (noc@nptel.iitm.ac.in) giving your Application number, email id and name. 
•        No changes will be entertained in any details after February 22, 2019 – 10:00 AM.
 
13. LAST DATE FOR CANCELLING EXAMS and getting a refund: 22 FEBRUARY 2019 10:00 AM.

Thanks & Regards,
NPTEL TEAM

Welcome to NPTEL Online Course : Equipment Design: Mechanical Aspects

Dear student

Welcome to NPTEL Online Courses and Certification!

Thank you for signing up for our online course "Equipment Design: Mechanical Aspects". We wish you an enjoyable and informative learning experience.

The course will begin on 28 January 2019. When content is released on the portal, you will get an email alerting you. Please watch the lectures, follow the course regularly and submit all assessments and assignments before the due date. Your regular participation is vital for learning.

We will open registration for the exam soon. A form has to be filled and the certification exam has a fee, which needs to be paid at the time of registration. Everyone who has signed-up for the course, including those who do not register for the exam, will continue to have access to the course contents.

There are two sections on the portal apart from the course content and assignment sections:

  •     The announcement list which will only have messages from course instructors and teaching assistants - regarding the lessons, assignments, exam registration, hall tickets etc.    
  •     The discussion forum which is for everyone to ask questions and interact, the course instructor/TA will respond to your queries.
  •     If you have any questions regarding the exam, registration, hall tickets, results, queries related to the technical content in the lectures, any doubts in the assignments, etc can be posted in the forum section

Details regarding the course: 

Name of the course:  Equipment Design: Mechanical Aspects
Course url: https://onlinecourses.nptel.ac.in/noc19_ch14/
Course duration :4 weeks
  • Date of exams: 31 March 2019(Sunday).
  • Time of Exams: Morning session 9am to 12 noon; Afternoon session: 2pm to 5pm
  • Exam for this course will be available in both morning & afternoon sessions.
  • Final List of exam cities will be available in exam registration form.
  • Exam registration url - Will be announced shortly.

Once again, thanks for your interest in our online courses and certification. Happy learning.


- NPTEL team