Process Control - Design, Analysis and Assessment : Results have been published
You will be informed via mail and SMS about the release of exam results and e-certificates.
https://docs.google.com/spreadsheets/d/e/2PACX-1vS0P4yTZbjm0iIa5iDSJwzT1ti6j8QnQIcnt7nxbVZ2l2IJUDQbGCVlebfUJPGScEe91jxsw4rA018D/pubhtml
To check the results & see your e-certificate, go to nptelonlinecourses.iitm.ac.
Login with the course enrolled e-mail id.
Clicking on the course name will redirect to the score board.
Click on Exam Scores - Both the Assignment scores and Exam score will be displayed.
Final score is the certification score.
Calculation Logic for each course is provided in the same page.
Once the certificates are printed, reprint of certificates with corrections will be done only by paying additional fees.
Feedback for Process Control - Design, Analysis and Assessment
Dear student
We are glad that you have attended the NPTEL online certification course.
We hope you found the NPTEL Online course useful and have started using NPTEL extensively.
In this regard, we would like to have a feedback from you regarding our course and whether there are any improvements, you would like to suggest.
We are enclosing an online feedback form and would request you to spare some of your valuable time to input your observations. Your esteemed input will help us in serving you better.
The link to give your feedback is : http://bit.ly/2UJOE4d
We thank you for your valuable time and feedback.
Thanks & Regards,
NPTEL Team
Solution 09 Updated
Hey guys,
Updated solution for assignment 9 has been uploaded.
Thanks & Regards,
TAs
Solution for Assignment 12
Dear Students,
Solution for Assignment 12 is uploaded. Assignment 09 solution will be updated to include the work out of questions 1 & 2 later.
Thanks & Regards,
TAs
Process Control: Design, Analysis and Assessment - Lecture slides available for download
Dear Students,
The lecture slides for the NPTEL course Process Control: Design, Analysis and Assessment is now available for download. Kindly find the link in the portal under the tab Lecture materials.
Regards
TA
Process Control - Design, Analysis and Assessment : Video recording on Interactive session
Process Control - Design, Analysis and Assessment : Hall ticket for April 27 & 28, 2019 NPTEL Online Certification exams is now available for download.
Assignment 10 - Evaluation
Dear students,
We found that Question 7 in assignment 10 had the solution wrongly configured as option d (instead of option a).
And options given for Question 8 were not in the range of the solution.
Hence, we omitted question 8 from evaluation and corrected the solution for question 7 as option a.
Sorry for the inconvenience. FYI
Thanks & Regards,
TAs
Process Control - Design, Analysis and Assessment : Live interaction with Course Instructor
Solution Upload
Dear students,
Assignments 7 - 11 solutions are uploaded.
Thanks & Regards,
TAs.
Solution for assignments
Dear Students,
We have uploaded solutions for assignments 2-6. We will be posting solutions for 7-11 by Friday 19th April 2019.
Assignment 12 solution will be made available from next week.
Thanks & Regards,
TAs
Process Control - Design, Analysis and Assessment : Week 12 Feedback Form
Process Control - Design, Analysis and Assessment : Week 12 LIVE
Solutions to Assignments
Dear students,
We will be posting solution for all the assignments by Wednesday 17th April 2019.
And we will be available and answer your queries as soon as possible during these couple of weeks.
We TAs sincerely apologize for not being active in the forum.
Thanks & Regards,
TAs
Process Control - Design, Analysis and Assessment: MATLAB Survey
Dear Learners,
Thanks to the support from MathWorks, this course had access to a MATLAB license together with learning content. Please tell us about your experience using MATLAB in this course. This survey should take less than five minutes to complete: Click here to give feedback
-NPTEL
Process Control - Design, Analysis and Assessment : Week 11 Feedback form
Process Control - Design, Analysis and Assessment : Week 11 LIVE
Process Control - Design, Analysis and Assessment : Exam Type and Certificate Format
Dear Candidate
Type of exam: Computer based exam
You will have to appear at the allotted exam center and produce your Hall ticket and Government Photo Identification Card(Example: Driving License, Passport, PAN card, Voter ID, Aadhaar-ID with your Name, date of birth, photograph and signature) for verification and take the exam in person. You can find the allotted exam center details in the hall ticket.
The questions will be on the computer and the answers will have to be entered on the computer; type of questions may include multiple choice questions, fill in the blanks, essay-type answers, etc
The hall ticket will be available for download tentatively around Mid of April 2019. We will notify the same through email.
On-Screen Calculator Demo Link:
Kindly use the below link to get an idea of how the On-screen calculator will work during the exam.
https://tcsion.com/OnlineAssessment/ScientificCalculator/Calculator.html
NOTE: Physical calculators are not allowed inside the exam hall.
FINAL CERTIFICATE:
The final score = 25% assignment score + 75% final certification exam score.
The final score will determine if you will/will not receive a certificate.
1. Final score < 40%: NO certificate
2. Final score between 40% -59%: Certificate of type "Successfully completing the course"
3. Final score between 60% -74%: Certificate with tag "Elite" printed at the top
4. Final score between 75% -89%: Certificate with tag "Elite" tag and "Silver medal" printed at the top
5. Final score of 90% and above: Certificate with "Elite" tag and "gold medal" printed on it.
-NPTEL Admin
Process Control - Design, Analysis and Assessment : Week 10 Feedback form
Correction in video
Dear students,
There was a correction in the Lecture - Week 6 Traditional Advanced Control Part 4.
Corrected video has been uploaded again in NPTEL interface.
Thanks & Regards,
TAs
Process Control - Design, Analysis and Assessment : Week 10 LIVE
Dear students
The lecture videos for Week-10 have been uploaded for the course [Process Control - Design, Analysis and Assessment].
https://onlinecourses.nptel.ac.in/noc19_ch10/unit?unit=89&lesson=91
The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already).
Assignment for Week-10 is also uploaded and can be accessed from the following link:
https://onlinecourses.nptel.ac.in/noc19_ch10/unit?unit=89&assessment=90
The assignment has to be submitted on or before Wednesday, [10.04.2019 23:59 IST].
As we have done so far, please use the discussion forums if you have any questions on this module.
-NPTEL Team
Process Control - Design, Analysis and Assessment : Week 9 Feedback form
Process Control - Design, Analysis and Assessment: Week 9 live
Dear students
The lecture videos for Week-9 have been uploaded for the course Process Control - Design, Analysis and Assessment .The lectures can be accessed using the following link:
https://onlinecourses.nptel.ac.in/noc19_ch10/unit?unit=82&lesson=83
The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already).
As we have done so far, please use the discussion forums if you have any questions on this module.
-NPTEL Team
Process Control - Design, Analysis and Assessment: Week 9 Assignment live
Dear Learners,
Assignment for Week-9 is uploaded and can be accessed from the following link:
https://onlinecourses.nptel.ac.in/noc19_ch10/unit?unit=82&assessment=87
The assignment has to be submitted on or before Wednesday, 2019-04-03, 23:59 IST..
As we have done so far, please use the discussion forums if you have any questions on this module.
-NPTEL Team
Process Control - Design, Analysis and Assessment : Week 8 Feedback
Process Control - Design, Analysis and Assessment: Week 8 live
Dear students
The lecture videos for Week-8 have been uploaded for the course Process Control - Design, Analysis and Assessment .The lectures can be accessed using the following link:
https://onlinecourses.nptel.ac.in/noc19_ch10/unit?unit=76&lesson=78
The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already).
As we have done so far, please use the discussion forums if you have any questions on this module.
-NPTEL Team
Process Control - Design, Analysis and Assessment: Week 8 Assignment live
Dear Learners,
Assignment for Week-8 is uploaded and can be accessed from the following link:
https://onlinecourses.nptel.ac.in/noc19_ch10/unit?unit=76&assessment=77
The assignment has to be submitted on or before Wednesday, 2019-03-27, 23:59 IST.
As we have done so far, please use the discussion forums if you have any questions on this module.
-NPTEL Team
Process Control - Design, Analysis and Assessment : Week 7 Feedback
Process Control - Design, Analysis and Assessment - Week 7 live
Dear students
The lecture videos for Week-7 have been uploaded for the course The lectures can be accessed using the following link:
https://onlinecourses.nptel.ac.in/noc19_ch10/unit?unit=70&lesson=71
The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already).
Assignment for Week-7 is also uploaded and can be accessed from the following link:
https://onlinecourses.nptel.ac.in/noc19_ch10/unit?unit=70&assessment=74
The assignment has to be submitted on or before Wednesday, 2019-03-20, 23:59 IST.
As we have done so far, please use the discussion forums if you have any questions on this module.
-NPTEL Team
Process Control - Design, Analysis and Assessment : Week 6 feedback form
Process Control - Design, Analysis and Assessment - Week 6 live
Dear students
The lecture videos for Week-6 have been uploaded for the course The lectures can be accessed using the following link:
https://onlinecourses.nptel.ac.in/noc19_ch10/unit?unit=63&lesson=65
The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already).
Assignment for Week-6 is also uploaded and can be accessed from the following link:
https://onlinecourses.nptel.ac.in/noc19_ch10/unit?unit=63&assessment=64
The assignment has to be submitted on or before Wednesday,2019-03-13, 23:59 IST.
As we have done so far, please use the discussion forums if you have any questions on this module.
-NPTEL Team
Process Control - Design, Analysis and Assessment: Reminder 2 for Exam Registration - April 28, 2019 exams
For more details, refer the announcement posted earlier on the course.
Process Control - Design, Analysis and Assessment - Week 5 Feedback
Dear Learner
Thank you for continuing with the course and hope you are enjoying it.
We would like to know if the expectations with which you joined this course are being met and hence please do take 2 minutes to fill out our weekly feedback form.
It would help us tremendously in gauging the learner experience.
Here is the link to the form: https://nptel.ac.in/noc/nocprofile/super_admin/weekly_feedback/form_login.php
Thank you.
-NPTEL team
Process Control - Design, Analysis and Assessment - Week 5 live
Process Control - Design, Analysis and Assessment : Week 4 feedback form
Process Control - Design, Analysis and Assessment - MATLAB Tutorial
Dear Students,
We are happy to announce that the first two MATLAB tutorials for the course "Process Control - Design, Analysis and Assessment" is now available. Kindly find the videos under Week 3 contents in the navigation bar. You can view the same using the following link :
https://onlinecourses.nptel.ac.in/noc19_ch10/unit?unit=35&lesson=49
https://onlinecourses.nptel.ac.in/noc19_ch10/unit?unit=35&lesson=50
Regards
TA
Process Control - Design, Analysis and Assessment - Week 4 live
Dear students
The lecture videos for Week-4 have been uploaded for the course Process Control - Design, Analysis and Assessment . The lectures can be accessed using the following link:
https://onlinecourses.nptel.ac.in/noc19_ch10/unit?unit=37&lesson=45
The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already).
Assignment for Week-4 is also uploaded and can be accessed from the following link:
https://onlinecourses.nptel.ac.in/noc19_ch10/unit?unit=37&assessment=38
The assignment has to be submitted on or before Wednesday, 2019-02-27, 23:59 IST.
As we have done so far, please use the discussion forums if you have any questions on this module.
-NPTEL Team
Week 3 feedback form : Process Control - Design, Analysis and Assessment
Process Control - Design, Analysis and Assessment - Week 3 live
Dear students
The lecture videos for Week-3 have been uploaded for the course Process Control - Design, Analysis and Assessment . The lectures can be accessed using the following link:
https://onlinecourses.nptel.ac.in/noc19_ch10/unit?unit=35&lesson=39
The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already).
Assignment for Week-3 is also uploaded and can be accessed from the following link:
https://onlinecourses.nptel.ac.in/noc19_ch10/unit?unit=35&assessment=36
The assignment has to be submitted on or before Wednesday, 2019-02-20, 23:59 IST.
As we have done so far, please use the discussion forums if you have any questions on this module.
-NPTEL Team
Process Control - Design, Analysis and Assessment : Week 2 feedback form
Process Control - Design, Analysis and Assessment : Week 2 is live now!!
Process Control: Design, Analysis and Assessment : Access to MATLAB/Simulink
Dear Friends,
We are happy to announce that MathWorks is providing support to our course "Process Control: Design, Analysis and Assessment" for ALL students who have enrolled. Their support includes video tutorials for enhancing basic MATLAB skills, forum support from one of the engineers at MathWorks and a free license to MATLAB Desktop and Simulink for the entire duration of the course (January-May 2019). This is a great initiative by MathWorks to help conduct MOOC courses over the years.
MATLAB is not just an advanced programming language but a remarkable computation and modelling tool to perform mathematical modelling, design, simulation and visualization. With the help of MATLAB/Simulink, students will be able to solve process control problems and get a deeper intuition of the interconnections between modelling a physical system, studying their behavior to various inputs, stability analysis, designing and tuning controllers and evaluating their performance.
Instructions on how to download and install MATLAB is available in the course portal along with video tutorials to help the students familiarize basics of MATLAB and Simulink . MATLAB tutorials for topics related to the course contents will be released every week.
With this facility, ALL the students who have enrolled for this course will be able to download and access the MATLAB Desktop. We sincerely hope that every learner will use MATLAB desktop with all integrity and diligence.
Enjoy learning!
Best wishes
Course Team
Process Control - Design, Analysis and Assessment - Week 1 LIVE
Process Control - Design, Analysis and Assessment - Reminder 1: REGISTER TODAY - CERTIFICATION EXAM FORM IS NOW OPEN!
of exam: April 28, 2019
of April 2019. We will confirm the same through an announcement once it is published.
Process Control - Design, Analysis and Assessment - Assignment 1 Live
Dear Learners,
Assignment 1 for "Process Control - Design, Analysis and Assessment" is now available on the portal.
The due date for the assignment is 2019-02-13, 23:59 IST.
Assignment URL : https://onlinecourses.nptel.ac.in/noc19_ch10/unit?unit=8&assessment=13
Week 1 feedback form - Process Control - Design, Analysis and Assessment
Process Control - Design, Analysis and Assessment : Week 1 is live now!!
Dear Learners,
Link to the course : https://onlinecourses.nptel.ac.in/noc19_ch10/
Happy viewing and learning!
-NPTEL Team
Process Control - Design, Analysis and Assessment - Assignment 0 LIVE
Dear Learners,
We welcome you all to this course. The assignment 0 has been released. This assignment is based on prerequisite of the course. Kindly note that marks obtained in this assignment will not be considered for the final assessment. You can find the assignment in the link below.You can submit the assignment multiple times before the due date. All the best !!
Assignment link : https://onlinecourses.nptel.ac.in/noc19_ch10/unit?unit=6&assessment=7
Regards
Course Admin
NPTEL
Process Control - Design, Analysis and Assessment - REGISTER TODAY - CERTIFICATION EXAM FORM IS NOW OPEN!
Welcome to NPTEL Online Course : Process Control - Design, Analysis and Assessment
- The announcement list which will only have messages from course instructors and teaching assistants - regarding the lessons, assignments, exam registration, hall tickets etc.
- The discussion forum which is for everyone to ask questions and interact, the course instructor/TA will respond to your queries.
- If you have any questions regarding the exam, registration, hall tickets, results, queries related to the technical content in the lectures, any doubts in the assignments, etc can be posted in the forum section
- Date of exams: 28 April 2019(Sunday).
- Time of Exams: Morning session 9am to 12 noon; Afternoon session: 2pm to 5pm
- Exam for this course will be available in both morning & afternoon sessions.
- Final List of exam cities will be available in exam registration form.
- Exam registration url - Will be announced shortly.