Mechanics of Machining - Oct 7th exam - score has been published.
- Login with the course enrolled mail id.
- Clicking on the course name will redirect to the score board.
- Click on Exam Scores - Both the Assignment scores and Exam score will be displayed.
- Final score is the certification score
Calculation Logic for each course is provided in the same page.
******************************
Note: For each course, reporting of issues comes with its own deadline (date and time) check the exam score/e-certificate as soon as you receive our notification.
Once the certificates are printed, reprint of certificates with corrections will be done only by paying additional fees.
To check the status of scores and e-certificates:
******************************
E-certificates will be available in http://nptel.ac.in/noc/ 3 days after the release of the scores.
You will be informed via mail and SMS about the release of the results and the release of e-certificates
If you are unable to see the scores/e-certificates, please write to nptelexam@nptel.iitm.ac.in
If you want to bring any specific issues wrt the scores/e-certificates to our attention, you can file the issue in http://nptel.ac.in/noc/ (
Regarding Assignment Solution
Dear Students
Solution of Assignment number 00, 01, 02, 05, 06 and 07 are now available. Remaining solutions will be uploaded till tomorrow.
Regards
CDT
Feedback for _more Mechanics of Machining
Remaining assignment solutions
Dear Students
Solution of Assignment number 03, 04 and 08 are now available.
Regards
CDT
Re-evaluation of assignment 2
Dear Students,
This is to inform you that there will be reevaluation of assignment 2. The question no. 10 of assignment 2 has been found to wrongly configured. Therefore, it has been decided for not to include the said question for the evaluation. The evaluation will be done only on the basis of 9 questions.
Regards,
Course Developer Team
Availability of Module 8
Dear Students,
Course contents of Module 8 are now available. Please go through it.
Regards,
Course Developer Team
Reevaluation of Assignment 3
Dear Students,
This is to inform you that there will be reevaluation of assignment 3. The range of the question number 3 of assignment 3 has been wrongly configured. Now the range value has been increased to 0.064.
Regards
CDT
Mechanics of Machining : Hall ticket for October 07, 2018 NPTEL Online Certification exams is now available for download
Module 7: Online
Dear all, contents for Module 7 are online now. You can access the video and lecture notes.
Hints for Assignment 5, question 1.
Availability of Module 6
Dear students,
course contents for module 6 are now available online.
Regards,
CDT
Exam and Certificate Format :Mechanics of Machining
Regarding the rectification of Question No. 8 of Assignment 5 in Module 5
Dear Students,
There is a typographic error in Qno. 8 of Assignment 5. The tool life equation should be there in Question. Please go through the corrected question and solve it by entering the correct Answer. The rectified question is as give below.
Taylor’s tool life equation
for a tool is given as VT0.25 = 470, where cutting speed V is in m/min and tool life T is in minutes. A fresh tool is operated at a cutting speed of 200 m/min for 20 minutes. After that the same tool is operated at a cutting speed of 100 m/min till failure. The total time in (minute) of machining by the tool is ____
Regards,
Course Developer Team
Regarding Rectification of Question number 4 of Assignment 4
Dear all,
In question number 4 of assignment 4, there is insufficient data. The work-piece diameter is missing in the question. The correct question is given below:
During an oblique turning process of a work-piece with diameter of 2 m, the feed force is 300 N and radial force is 200 N. Spindle RPM is 1000. If the total force on the cutting tool is 540 N. The power available at the spindle in (kW) is _____
Please consider the correction and resubmit the Assignment 4.
Live Sessions Today
Dear Students
Great opportunity to all of you to meet Prof. U.S. Dixit online today.
Please connect with us by following the link:
https://youtu.be/rGglfiGvlTU
Date: 10 September 2018 (today)
Time: 03:00PM
Ask your questions live to Prof. Dixit.
NB: A request to you all, please ask questions related only to this course.
Best Wishes
NPTEL MOOCS Technical Team
Reminder: Live session (Mechanics of Machining) Started now!!
Dear Learners,
Live session started now.
Please connect with us by following the link:
https://youtu.be/rGglfiGvlTU
Ask your questions live to Prof. Dixit.
Best Wishes
-NPTEL team
LIVE SESSION
Dear Students,
Great opportunity to attend the first Live Session in the NPTEL MOOCs course “Mechanics of Machining” as per following details:
Date: 10 September 2018
Time: 3.00 PM
Post your questions to us at https://goo.gl/forms/7rF6AZwS1BTxv1uA2
Please be with us. We will share the information to connect to the live session very soon.
You can also choose to questions live during the session.
Regards,
NPTEL MOOCs team
Course content of Module 5 are now available
Update on registration of exam
Course contents of Module 4 are now available
Dear Learners,
The course contents of Module 4 (Lecture, Notes and Assignment) are now available. Please go through it.
Regards,
Amit Raj
(Course Developer team)
Exam Registration extended till Sep 3, 2018!!
Mechanics of Machining : Due dates for Assignment 2 and 3 Extended!!
Availability of Lecture Notes for Module 2
Dear Students,
Lecture Notes for Module 2 (Lec 4 to Lec 6) are now available. You all can download it.
Regards,
Amit Raj
(Course Developer Team)
Announcement for Week 2 (Module 2)
Dear Students,
The Lectures, Assignment 2 and respective Notes for Module 2 are now accessible.
Regards
Vikash Kumar
Course Developer Team
Availability of Lecture Notes of Module 1
Dear Students,
The Lecture Notes of Module 1 are now available. You can download it. The download link is provided at the bottom left side of every lectures.
Regards,
Amit Raj
(Course Developer Team)
Lectures for Module 1 are now Accessible
Dear Students,
The lectures are now accessible. Now you can comfortably open it. You can find our course lectures (lesson/lecture 1 to 3) from the playlist. The you tube link for lectures has been shared to you as below.
https://www.youtube.com/channel/UCCDzHkpuIuD1ZC0wsCXUuPQ/
Lectures and Assignment for Module 1 are now Available
Dear students,
We hope you all are doing well. Please go through the lectures (lecture 1 to lecture 3) and corresponding Assignment 1 of Module 1. Feel free to ask any of your query to understand Module 1 of this course. We are here to assist you.
Thanks and Regards,
Course Developer Team
Progressive Web App (PWA) for NPTEL Online Certification Courses
Assignment 00 Published
Dear Students
Assignment 00 is released. Please check the following link to view the Assignment 00.
https://onlinecourses.nptel.ac.in/noc18_me56/unit?unit=5&assessment=8
Please try to answer all the questions. Marks gained in this assignment will not be calculated for final grade.The present assignment will prepare you for facing the actual assignments which are to be released every week.
Best Regards
Course Developer Team
Reminder-1: REGISTER TODAY - CERTIFICATION EXAM FORM IS NOW OPEN!
Dear Learner:
Exam Session time: Forenoon: 9.00 AM -12.00 PM ; Afternoon: 2.00 PM - 5.00 PM
Last date for registration: August 27, 2018 10.00 Am (Monday) .
Mode of payment: Online payment - debit card/credit card/net banking or via SPOC of college
HALL TICKET:
The hall ticket will be available for download tentatively in the end of September 2018. We will confirm the same through an announcement once it is published.
Final score on certificate: 25% of assignment score + 75% of certification exam score.
Award of certificate: Hard and soft copy of Certificate will be awarded only to those candidates who register for the exam, attend the certificate examination and whose Final score >= 40%
Please check the Announcements section of your course for further details on this.
The final score, assignment score and exam score will be printed on the certificate. The certificate will also have a link to the NPTEL website (http://nptel.ac.in/noc), where on logging in, your scores and e-certificate will be available for verification (Appropriate announcements will be made). Please do regularly submit assignments to get a good final score.
IMPORTANT NOTES
1) FOR CANDIDATES WHO WOULD LIKE TO WRITE MORE THAN 1 COURSE EXAM:- you can add or delete courses and pay separately – till the date when the exam form closes. No changes will be entertained after that. You can register for a maximum of 4 course exams ( 2 on Oct 7 and 2 on Oct 28. Same day of exam – you can write exams for 2 courses in the 2 sessions. Same center will be allocated for both the sessions).
2) FOR CANDIDATES WHO ARE PAYING VIA THE LOCAL CHAPTER OF YOUR COLLEGE:-
1. In the exam form, you will fill all the details and also upload photo, signature.
2. Ensure that you had selected your college name correctly from the drop-down list in the form.
3. Payment of exam fees - click on the tab - 'PAY VIA SPOC'.
The SPOC has to now confirm to NPTEL that he/she will pay fees on your behalf.
If the SPOC says NO, you will be intimated via email.
Then it becomes your responsibility to come back to the exam form and make the payment.
If you do not pay the exam fees within the prescribed time, you will not be able to write the exam.
Please read the instructions carefully before submitting the form.
In case of any queries please write to us at noc@nptel.iitm.ac.in
Thanks & Regards,
NPTEL TEAM
Welcome to NPTEL Online Course : Mechanics of Machining