Feedback for Metal Cutting And Machine Tools

Dear student

We are glad that you have attended the NPTEL online certification course.

We hope you found the NPTEL Online course useful and have started using NPTEL extensively.

In this regard, we would like to have a feedback from you regarding our course and whether there are any improvements, you would like to suggest.
 
We are enclosing an online feedback form and would request you to spare some of your valuable time to input your observations. Your esteemed input will help us in serving you better.

The link to give your feedback is : https://goo.gl/forms/soqdDSljkNO4ZLdl1


We thank you for your valuable time and feedback.

Thanks & Regards,
NPTEL Team 


Best of Luck for your Exam

Best of luck for your examination!


NPTEL Team



Metal Cutting And Machine Tools : Hall ticket for April 28/29 NPTEL Online Certification exams is now available for download

Dear Candidate:

If you have registered and paid successfully for the 
April28/29 NPTEL Online certification exams, your Admit Card/Hall ticket is now available at http://nptelonlinecourses.iitm.ac.in/

Login with your registered Google-enabled account email id (used to access the course on the portal and used for registering for the exam) and its password to access the link. Click on April exam to download the hall ticket(s) for the April28/29 exams, from the link.

2. You can also download it from the alternate link given below:
https://cdn3.digialm.com//EForms/configuredHtml/885/54105/login.html  

Please try to access both the links to download your hall ticket: if you are not able to find your hall ticket in both the links, kindly write to us at 
nptelexam@nptel.iitm.ac.in
 
Note that you will be able to login here, only if you have a valid registration for exams on April 28/29, 2018. 

Please download hall ticket, take a print out and along with a original ID card, carry it with you to the exam venue (The exam centre address is displayed in the hall ticket). Read all instructions given in the admit card/ hall ticket carefully and follow them.
Download hall tickets for all the exams you have registered for - in case you don't get the hall tickets for any particular course, please write to  nptelexam@nptel.iitm.ac.in .

IMPORTANT:

1. Change of shift, course, exam center, exam city is NOT POSSIBLE.
2. You WILL NOT BE ALLOWED to write the exam if you are showing up at the exam center which is not allocated to you by mistake or by intention.
3. Candidates will not be allowed to write the exam without Hall ticket and proper id proof. Proof on the mobile phones or soft copy of hall ticket is NOT PERMITTED.


NPTEL Team wishes you the very best for the certification exam.


Metal Cutting and Machine Tools :Video recording on Interactive session

Dear All,

There was an interaction session with some of the students for the course "Metal Cutting and Machine Tools"

The video recording is now available in the portal under the last unit "Interactive session with students"

Those who are interested can take a look.


-NPTEL Team


Solution of Week 4 Assignment 4 is now available

Dear Students,

Solution of Week 4 Assignment 4 is now available, you can access the same using the following link:

https://drive.google.com/open?id=1zsRlW_nV3l4jG3-44vuOxLQrZ3AOMviJ

Best wishes,
Course coordinators


Regarding questions 4 - 8 in assignment 4

Students may kindly note that the cluster of questions 4 - 8 in assignment 4 share the same data. If the pulse generator frequency has been declared as 1000 ppm i question 5 - it is applicable to all the questions 4 -8.


Last date for Exam registration extended till March 15, 2018 - 1 pm (Thursday) - Hurry up and register today!!

Dear Candidate

Due to technical issue there was some problem with the exam form since yesterday. Now the issue has been fixed.

Last date for exam registration has been extended till March 15, 2018 - 1 pm (Thursday)

Last date for making the payment individually - March 16, 2018 - 1:00 PM (Friday)

If you have not yet registered for the exam, login to the form and apply for the exam today! If you have filled the form but not done the payment, Please complete the payment before March 16 1:00 pm.

Register for the exam today at: http://nptelonlinecourses.iitm.ac.in/

For other details about exam registration, please check our previous announcement.

NOTE:  NO EXTENSIONS BEYOND THESE DATES WILL BE GIVEN.

-NPTEL Team


Last date for Exam registration extended

Dear Students

There seems to be some technical issue with the exam registration form. 
We are trying to find out the reason and resolve the same. 

Hence we are extending registration till March 15, 2018 - 1 pm.

Thank you


Solution of Week 3 Assignment 3 is now available

Dear Students,

Solution of Week 3 Assignment 3 is now available, you can access the same using the following link:

https://drive.google.com/open?id=1smJI9gJjUB0FEqe0CosIaTU7850U_dJ3

Best wishes,
Course coordinators


Metal Cutting and Machine Tools:Exam and Certificate Format

Dear student

The certification exam will be conducted at designated centres in the city chosen by you. You have to register for the exam by filling up the form, paying the exam fee, appear in person and score >= 40% to get the certificate.

Register for the exam today at: http://nptelonlinecourses.iitm.ac.in/

Exam registration form closes on March 14, 2018 - 5 pm (Wednesday).

For other details about exam registration, please check our previous announcement.

Type of exam: Computer based exam 

You will have to appear at the allotted exam centre and produce your Hall ticket and Government Photo Identification Card(Example: Driving License,Passport, PAN card, Voter ID, Aadhaar-ID with your Name, date of birth, photograph and signature) for verification and take the exam in person. You can find the allotted exam center details in the hall ticket.

The questions will be on the computer and the answers will have to be entered on the computer; type of questions may include multiple choice questions, fill in the blanks, essay type answers, etc

The hall ticket will be available for download tentatively around 10 - 16th April 2018. We will notify the same through email.
 
FINAL CERTIFICATE:

The final score = 25% assignment score + 75% final certification exam score.
The final score will determine if you will/will not receive a certificate.

1. Final score < 40%: NO certificate

2. Final score between 40% -59%: Certificate of type "Successfully completing the course"

3. Final score between 60% -89%: Certificate with tag "Elite" printed at the top

4. Final score of 90% and above: Certificate with "Elite" tag and the gold medal printed on it.

Please click the link here for certificate format: 
-NPTEL Admin


NPTEL: LIVE streaming of Online Certification Course on Metal Cutting and Machine Tools

Dear Learners,

Kindly note that we are LIVE streaming one session of the course.
Details are shown below. 
Please click on the following link and clarify your doubts.

**********************************************************************
COURSE:   Metal Cutting and Machine Tools
TIME:    15th March 2018, 10.00AM to 11.00AM
PROFESSOR: Prof. Asimava Roy Choudhury
*********************************************************************

Request you to share this news with students and faculty.
Suggestion - Students/faculty can perhaps assemble in one room/lab,
watch the session together and post their doubts.

Click on the above link to fill the Google form and share questions you may want to ask the  Professor. 

We would also like to hear from you after the session.
Request you to share your thoughts.

NPTEL TEAM
IIT MADRAS


Last date for Exam registration extended - Hurry up and register today!!

Dear Candidates

Last date for exam registration has been extended till March 14, 2018 - 5 pm (Wednesday)

Last date for making the payment individually - March 15, 2018 - 5 PM (Thursday)

The certification exam will be conducted at designated centers in the city chosen by you. You have to register for the exam by filling up the form, paying the exam fee and appear in person to get the certificate.

Hard and soft copy of Certificate will be awarded only to those candidates who register for the exam, attend the certificate examination and whose Final score > 40%

Register for the exam today at: http://nptelonlinecourses.iitm.ac.in/

For other details about exam registration, please check our previous announcement.

-NPTEL Team


Last date of submission of week 4 assignment 4 has been extended to 15-03-2018 23:59 IST

Dear students,

Last date of submission of week 4 assignment 4 has been extended to 15-03-2018 23:59 IST.

Best wishes,
Course-coordinators


Solution of Week 2 Assignment 2 is now available

Dear Students,

Solution of Week 2 Assignment 2 is now available, you can access the same using the following link:

https://drive.google.com/file/d/1wqzBiUBX3EhfNTZdqM7FMdpnZb3ruZka/view

Best wishes,
Course coordinators


Additional notes on gear hobbing and shaping are now available under Week 4 lecture tab

Dear Students,

Additional notes on gear hobbing and shaping are now available under Week 4 lecture tab. Also the same can be accessed using the following link:

https://drive.google.com/open?id=1_41GBfuuFsLZ48YGFn5nwHV7suAQx5VB

If you face any problem to access the notes, please let us know.

Best wishes,
Course coordinators
 


Re-evaluation of assignment 1- Q10 has been removed

Candidates enrolled for the course metal cutting and machine tools may kindly note that the 10th question of the first assignment has been removed and re-evaluation of the assignment has been done. Due to this, marks obtained for the assignment is likely to  change. Inconvenience is regretted


Best wishes,

Course-coordinators


Regarding Week 2 lecture material access

Dear Students,


Some of you have reported that you can not download week 2 lecture materials, the problem has been resolved now.  You can also download the same using the following link:


Please let us know if the problem still persists.

Best wishes,
Course coordinators


Metal Cutting and Machine Tools : Week 4 Assignment 4 is now available. Due date for submission of the same is 7th March 2018 23:59 IST

Dear students,

Week 4 Assignment 4 for the course "Metal Cutting and Machine Tools" is now available. Due date for submission of the same is 7th March 2018 23:59 IST. The assignment can be accessed under Week 4 tab using the following link after you log in the course portal :

https://onlinecourses.nptel.ac.in/noc18_me14/course 

For any problem related to access of the portal/assignment/lectures, please post an query mentioning the problem in the forum.

Best wishes,
Course coordinators


Solution of Week 1 Assignment 1 is now available

Dear Students,

Solution of Week 1 Assignment 1 is now available, you can access the same using the following link:

https://drive.google.com/open?id=1gywmk1LZIH1igD2Ourl_dGKWNu6OoXJY

Best wishes,
Course co-ordinators


Metal Cutting and Machine Tools : Week 4 Videos are available !!

Dear Students,

                             Week 4 Videos are available in the COURSE OUTLINE section under Week 4!!


Last date of submission of week 1 assignment 1 has been extended to 23-02-2018 23:59 IST

Dear students,

Last date of submission of week 1 assignment 1 has been extended to 23-02-2018 23:59 IST.

Best wishes,
Course-coordinators


Metal Cutting and Machine Tools : Week 3 Assignment 3 is now available. Due date for submission of the same is 7th March 2018 23:59 IST

Dear students,

Week 3 Assignment 3 for the course "Metal Cutting and Machine Tools" is now available. Due date for submission of the same is 7th March 2018 23:59 IST. The assignment can be accessed under Week 3 tab using the following link after you log in the course portal :

https://onlinecourses.nptel.ac.in/noc18_me14/course 

For any problem related to access of the portal/assignment/lectures, please post an query mentioning the problem in the forum.

Best wishes,
Course coordinators


Week 3 lecture material download link

Dear students,

Week 3 lecture material in pdf format is now available. You can download the same using the following link:

https://drive.google.com/file/d/13v7WZY2HugH8h9tWj6YYkYQWqAY5K783/view

Best wishes,
Course coordinators


Metal Cutting and Machine Tools : Week 3 Videos are available !!

Dear Students,

                              Week 3 Videos are available in the Course Outline section under Week 3.


Metal Cutting and Machine Tools : Week 2 Assignment 2 is now available. Due date for submission of the same is 28th Feb 2018 23:59 IST

Dear students,

Week 2 Assignment 2 for the course "Metal Cutting and Machine Tools" is now available. Due date for submission of the same is 28th Feb 2018 23:59 IST. The assignment can be accessed under Week 2 tab using the following link after you log in the course portal :

https://onlinecourses.nptel.ac.in/noc18_me14/course 

For any problem related to access of the portal/assignment/lectures, please post an query mentioning the problem in the forum.

Best wishes,
Course coordinators


Week 2 lecture material download link

Dear students,

Week 2 lecture material in pdf format is now available. You can download the same using the following link:

https://drive.google.com/open?id=19cG_GuIt29Y-LXog4H_EtF-28aM6aJS5


Correction- Week 1 Lecture 3

Dear students,

In the third lecture of the first week, at the time 16.21, PHI - 1 has been defned to be equal to 90- PHI. 

This is not correct. PHI - S is equal to 90 - PHI and PHI-1 is not connected to the american system 

Readers may kindly note this correction 

Thanks and with apologies for the mistake 

A Roy Choudhury


Metal Cutting and Machine Tools : Week 2 Videos are available !!

Dear Students,

                             Week 2 Videos are available in the COURSE OUTLINE section under Week 2!!


Course content download link

Dear Students,

You can download course contents for week 1 using the following link:

https://drive.google.com/file/d/1gQm9LMTAKLDGfqc_YksnLVdsuBYxlCyH/view 

Best wishes,
Course coordinators  


Course content download link

Dear Students,

You can download course contents using the following link:

http://nptel.ac.in/courses/112105233/

Best wishes,
Course coordinators  


Metal Cutting and Machine Tools : Week 1 Assignment 1 is now available. Due date for submission of the same is 21st Feb 2018 23:59 IST

Dear students,

Week 1 Assignment 1 for the course "Metal Cutting and Machine Tools" is now available. Due date for submission of the same is 21st Feb 2018 23:59 IST. The assignment can be accessed under Week 1 tab using the following link after you log in the course portal :

https://onlinecourses.nptel.ac.in/noc18_me14/course 

For any problem related to access of the portal/assignment/lectures, please post an query mentioning the problem in the forum.

Best wishes,
Course coordinators


Metal Cutting and Machine Tools : Week 1 Assignment 1 is now available. Due date for submission of the same is 21st Feb 2018 23:59 IST

Dear student,

Week 1 Assignment 1 for the course "Metal Cutting and Machine Tools" is now available. Due date for submission of the same is 21st Feb 2018 23:59 IST. The assignment can be accessed using the following link after you log in the course portal :

https://onlinecourses.nptel.ac.in/noc18_me14/course 

For any problem related to access of the portal/assignment/lectures, please post an query mentioning the problem in the forum.

Best wishes,
Course coordinators


Metal Cutting and Machine Tools : Week 1 Videos are available !!

Dear Students,
                              Week 1 Videos are available now in the course outline section under Week 1. 


Reminder 1:REGISTER TODAY - CERTIFICATION EXAM FORM IS NOW OPEN!

Dear Student:

Here is the much-awaited announcement on registering for the April 2018 certification exam. The registration for the certification exam is open only to students who have enrolled in the course.

Registration is open from 09th January 2018 (Tuesday) until March 07, 2018 10:00 AM (Wednesday)
The certification exam registration URL is: http://nptelonlinecourses.iitm.ac.in/

(If you want to register for the exam for this course, login here using the same email id used to enroll to the course)

Dates of exam: April 28 and April 29, 2018 
Session: [Afternoon] For this course there is no ”Forenoon” Session.
You can register for a maximum of 4 course exams (same day of exam – 2 sessions. Same center will be allocated for both the sessions).

Exam Session time: Forenoon: 9.00 AM -12.00 PM ; Afternoon: 2.00 PM - 5.00 PM
Examination Cities: The exam is to be conducted in several cities across India whose list is available on the registration form. 

Click here to access the list of exam cities: http://nptel.ac.in/pdf/examcities_final.pdf
Registration fees: Rs 1100/-
(Students belonging to the SC/ST category can avail a 50% fee waiver - please select Yes for the SC/ST option and upload the correct Community certificate)
Students belonging to the PwD category can avail a 50% fee waiver - please select Yes for the option and upload the relevant Disability certificate.

Mode of payment:  Online payment - debit card/credit card/net banking or via SPOC of college

HALL TICKET:
The hall ticket will be available for download tentatively between 10 - 16th April 2018. We will confirm the same through an announcement once it is published.

Final score on certificate: 25% of assignment score + 75% of certification exam score.
Award of certificate:  Hard and soft copy of Certificate will be awarded only to those candidates who register for the exam, attend the certificate examination and whose Final score >= 40%

The final score, assignment score and exam score will be printed on the certificate. The certificate will also have a link to the NPTEL website (http://nptel.ac.in/noc), where on logging in, your scores and e-certificate will be available for verification  (Appropriate announcements will be made). Please do regularly submit assignments to get a good final score.

IMPORTANT NOTES

1) FOR CANDIDATES WHO WOULD LIKE TO WRITE MORE THAN 1 COURSE EXAM:- you can add or delete courses and pay separately – till the date when the exam form closes. No changes will be entertained after that.  

2) FOR CANDIDATES WHO ARE PAYING VIA THE LOCAL CHAPTER OF YOUR COLLEGE:- 

1. In the exam form, you will fill all the details and also upload photo, signature.
2. Ensure that you had selected your college name correctly from the drop-down list in the form.
3. Payment of exam fees - click on the tab - 'PAY VIA SPOC'.
The SPOC has to now confirm to NPTEL that he/she will pay fees on your behalf.
If the SPOC says NO, you will be intimated via email.
Then it becomes your responsibility to come back to the exam form and make the payment.
If you do not pay the exam fees within the prescribed time, you will not be able to write the exam.

Please read the instructions carefully before submitting the form.
In case of any queries please write to us at noc@nptel.iitm.ac.in

Thanks & Regards,
NPTEL TEAM


Welcome to NPTEL Online Course: Metal Cutting and Machine Tools

 
 

Dear Student,

Welcome to NPTEL Online Courses and Certification!

 

Thank you for signing up for our online course "Metal Cutting and Machine Tools". We wish you an enjoyable and informative learning experience.

The course will begin on Feb 05, 2018. When content is released on the portal, you will get an email alerting you. Please watch the lectures, follow the course regularly and submit all assessments and assignments before the due date. Your regular participation is vital for learning.
 
We will open registration for the exam soon after the course starts. A form has to be filled and the certification exam has a fee, which needs to be paid at the time of registration. Everyone who has signed-up for the course, including those who do not register for the exam, will continue to have access to the course contents.

There are two sections on the portal apart from the course content and assignment sections:

  • The announcement list which will only have messages from course instructors and teaching assistants - regarding the lessons, assignments, exam registration, hall tickets etc.    
  • The discussion forum which is for everyone to ask questions and interact - If you have any questions regarding the technical content in the lectures, any doubts in the assignments or any question related to the exam, registration, hall tickets, results, etc, kindly write about this in the forum and the course instructor/TA will respond to it. Please use this well and participate to benefit from the course.
     

Details regarding the course:
 
Name of the course: 
Metal Cutting and Machine Tools

Course url: 
https://onlinecourses.nptel.ac.in/noc18_me14

  • Date and Time of Exams: April 28 (Saturday) and April 29 (Sunday) :Afternoon session: 2pm to 5pm
  • Exam for this course will be available in one session on both 28 and 29 April.
  • Final List of exam cities will be available in exam registration form.
  • Exam registration url - Will be announced shortly

 

Certificates from the IITs & IISc...

Once again, thank you for your interest in our online courses and certification. Happy learning - NPTEL team.