Feedback for Industrial Automation And Control
Best of Luck for your Exam
Industrial Automation and Control: Average Score of Week 12 Assignment 1
The average score of Week 12 Assignment 1 is 50.3.
Industrial Automation and Control: Week 12 Assignment 1 Solution Released
The solution for Week 12 Assignment 1 is available under Week 12 Module 5 tab.
Industrial Automation and Control: Average Score of Week 11 Assignment 1
The average score of Week 11 Assignment 1 is 27.0.
Industrial Automation and Control: Week 11 Assignment 1 Solution Released
The solution for Week 11 Assignment 1 is available under Week 11 Module 4 (Contd.) tab.
Industrial Automation And Control: Hall ticket for April 28/29 NPTEL Online Certification exams is now available for download
Dear Candidate:
If you have registered and paid successfully for the April28/29 NPTEL Online certification exams, your Admit Card/Hall ticket is now available at http://nptelonlinecourses.i
Login with your registered Google-enabled account email id (used to access the course on the portal and used for registering for the exam) and its password to access the link. Click on April exam to download the hall ticket(s) for the April28/29 exams, from the link.
2. You can also download it from the alternate link given below:
https://cdn3.digialm.com//EFor
Please try to access both the links to download your hall ticket: if you are not able to find your hall ticket in both the links, kindly write to us at nptelexam@nptel.iitm.ac.in
Note that you will be able to login here, only if you have a valid registration for exams on April 28/29, 2018.
Please download hall ticket, take a print out and along with a original ID card, carry it with you to the exam venue (The exam centre address is displayed in the hall ticket). Read all instructions given in the admit card/ hall ticket carefully and follow them.
Download hall tickets for all the exams you have registered for - in case you don't get the hall tickets for any particular course, please write to nptelexam@nptel.iitm.ac.in .
IMPORTANT:
1. Change of shift, course, exam center, exam city is NOT POSSIBLE.
2. You WILL NOT BE ALLOWED to write the exam if you are showing up at the exam center which is not allocated to you by mistake or by intention.
3. Candidates will not be allowed to write the exam without Hall ticket and proper id proof. Proof on the mobile phones or soft copy of hall ticket is NOT PERMITTED.
NPTEL Team wishes you the very best for the certification exam.
Industrial Automation and Control: Week 12 Assignment 1 Released
Week 12 Assignment 1 has been released. The last date of submission is 18/04/2018 till 23:59 hours.
Given below is the link for Week 12 Assignment 1 of Industrial Automation and Control.
Click here
Industrial Automation And Control : Week 12 Videos are available !!
Dear Students,
Week 12 Videos are available in the COURSE OUTLINE section under Week 12 !!
Industrial Automation and Control: Average Score of Week 10 Assignment 1
The average score of Week 10 Assignment 1 is 30.5.
Industrial Automation and Control: Week 10 Assignment 1 Solution Released
The solution for Week 10 Assignment 1 is available under Week 10 Module 4 (Contd.) tab.
Industrial Automation And Control : Feedback on Text Transcripts (English) of NPTEL videos
Industrial Automation and Control: Week 11 Assignment 1 Released
Week 11 Assignment 1 has been released. The last date of submission is 11/04/2018 till 23:59 hours.
Given below is the link for Week 11 Assignment 1 of Industrial Automation and Control.
Click here
Industrial Automation And Control : Week 11 Videos are available !!
Dear Students,
Week 11 Videos are available in the COURSE OUTLINE section under Week 11 !!
Industrial Automation and Control: Average Score of Week 9 Assignment 1
The average score of Week 9 Assignment 1 is 41.1.
Industrial Automation and Control: Week 9 Assignment 1 Solution Released
The solution for Week 9 Assignment 1 is available under Week 9 Module 4 Tab.
Industrial Automation and Control: Week 10 Assignment 1 Released
Week 10 Assignment 1 has been released. The last date of submission is 04/04/2018 till 23:59 hours.
Given below is the link for Week 10 Assignment 1 of Industrial Automation and Control.
Click here
Industrial Automation And Control : Week 10 Videos are available !!
Dear Students,
Week 10 Videos are available in the COURSE OUTLINE section under Week 10 !!
Industrial Automation and Control: Week 8 Assignment 1 Solution Released
The solution for Week 8 Assignment 1 is available under Week 8 Module 3 (contd.) and Module 4 tab.
Industrial Automation and Control: Average Score of Week 8 Assignment 1
The average score of Week 8 Assignment 1 is 55.4.
Industrial Automation and Control: Week 9 Assignment 1 Released
Week 9 Assignment 1 has been released. The last date of submission is 28/03/2018 till 23:59 hours.
Given below is the link for Week 9 Assignment 1 of Industrial Automation and Control.
Click here
Industrial Automation and Control: Average Score of Week 7 Assignment 1
The average score of Week 7 Assignment 1 is 50.8.
Industrial Automation And Control : Week 9 Videos are available !!
Dear Students,
Week 9 Videos are available in the COURSE OUTLINE section under Week 9 !!
Industrial Automation and Control: Week 7 Assignment 1 Solution Released
The solution for Week 7 Assignment 1 is available under Week 7 Module 3 (contd.) Tab.
Last date for Exam registration extended till March 15, 2018 - 1 pm (Thursday) - Hurry up and register today!!
Industrial Automation and Control: Last date of exam registration
Exam registration date is extended till March 15, 2018 1 PM
Industrial Automation and Control: Extension of Exam Registration Date
There seems to be some technical issue
with the exam registration form. We are trying to find out the reason and solve
the issue.
We will be extending the date of
registration since we are facing this issue. The extension date will be
announced shortly.
Industrial Automation And Control : Video recording on Interactive session
https://www.youtube.com/watch?v=_Nmpdid5eMo
Industrial Automation and Control: Week 8 Assignment 1 Released
Week 8 Assignment 1 has been released. The last date of submission is 21/03/2018 till 23:59 hours.
Given below is the link for Week 8 Assignment 1 of Industrial Automation and Control.
Click here
Industrial Automation And Control : Week 8 Videos are available !!
Dear Students,
Week 8 Videos are available in the COURSE OUTLINE section under Week 8 !!
Industrial Automation and Control: Average Score of Week 6 Assignment 1
The average score of Week 6 Assignment 1 is 52.2.
Industrial Automation And Control: Exam and Certificate Format
Exam registration form closes on March 14, 2018 - 5 pm (Wednesday).
For other details about exam registration, please check our previous announcement.
Type of exam: Computer based exam
You will have to appear at the allotted exam centre and produce your Hall ticket and Government Photo Identification Card(Example: Driving License,Passport, PAN card, Voter ID, Aadhaar-ID with your Name, date of birth, photograph and signature) for verification and take the exam in person. You can find the allotted exam center details in the hall ticket.
The questions will be on the computer and the answers will have to be entered on the computer; type of questions may include multiple choice questions, fill in the blanks, essay type answers, etc
The hall ticket will be available for download tentatively around 10 - 16th April 2018. We will notify the same through email.
FINAL CERTIFICATE:
The final score = 25% assignment score + 75% final certification exam score.
1. Final score < 40%: NO certificate
2. Final score between 40% -59%: Certificate of type "Successfully completing the course"
3. Final score between 60% -89%: Certificate with tag "Elite" printed at the top
4. Final score of 90% and above: Certificate with "Elite" tag and the gold medal printed on it.
Please click the link here for certificate format:
Industrial Automation and Control: Week 6 Assignment 1 Solution Released
The solution for Week 6 Assignment 1 is available under Week 6 Module 3 (contd.) Tab.
NPTEL: LIVE streaming of Online Certification Course on Industrial Automation And Control
Industrial Automation and Control: Week 7 Assignment 1 Released
Week 7 Assignment 1 has been released. The last date of submission is 14/03/2018 till 23:59 hours.
Given below is the link for Week 7 Assignment 1 of Industrial Automation and Control.
Click Here
Last date for Exam registration extended - Hurry up and register today!!
Industrial Automation and Control: Week 5 Assignment 1 Solution Released
The solution for Week 5 Assignment 1 is available under Week 5 Module 3 (contd.) Tab.
Industrial Automation And Control : Week 7 Videos are available !!
Dear Students,
Week 7 Videos are available in the COURSE OUTLINE section under Week 7 !!
Industrial Automation and Control: Average Score of Week 5 Assignment 1
The average score of Week 5 Assignment 1 is 50.9.
Industrial Automation and Control: Week 6 Assignment 1 Released
Week 6 Assignment 1 has been released. The last date of submission is 07/03/2018 till 23:59 hours.
Given below is the link for Week 6 Assignment 1 of Industrial Automation and Control.
Week 6 Assignment 1
Industrial Automation And Control : Week 6 Videos are available !!
Dear Students,
Week 6 Videos are available in the COURSE OUTLINE section under Week 6 !!
Industrial Automation and Control: Average Score of Week 4 Assignment 1
The average score of Week 4 Assignment 1 is 44.7.
Industrial Automation and Control: Week 4 Assignment 1 Solution Released
The solution for Week 4 Assignment 1 is available under Week 4 Module 3 (contd.) Tab.
Industrial Automation and Control: Week 5 Assignment 1 Last Date of Submission
The last date of submission of Week 5 Assignment 1 is 28/02/2018 till 23:59 hrs.
Industrial Automation and Control: Week 5 Assignment 1 released
The
link for Week 5 Assignment 1 is given below.
Week 5 Assignment 1
Industrial Automation And Control : Week 5 Videos are available !!
Dear Students,
Week 5 Videos are available in the Course Outline section under Week 5.
Industrial Automation and Control: Average Score of Week 3 Assignment 1
The average score of Week 3 Assignment 1 is 45.5.
Industrial Automation and Control: Week 3 Assignment 1 Solution Released
Week 3 Assignment 1 Solution is available under Week 3 Module 3 tab.
Industrial Automation and Control: Re-evaluation of Week 2 Assignment 1
Dear Students,
As there was a mistake in Q.10 of Week 2 Assignment 1, a re-evaluation of that assignment is done ignoring Q.10. Your marks are
updated accordingly in the portal. Please check.
Industrial Automation and Control: Updated Average Score of Week 2 Assignment 1
The updated average score of Week 2 Assignment 1 is 60.5
Industrial Automation and Control: Week 4 Assignment 1
Week 4 Assignment 1 has been released. The last date of submission is 21/02/2018.
Given below is the link for Week 4 Assignment 1 of Industrial Automation and Control.
Week 4 Assignment 1
Industrial Automation And Control : Week 4 Videos are available !!
Dear Students,
Week 4 Videos are available in the COURSE OUTLINE section under Week 4 !!
Industrial Automation and Control: Week 3 Assignment 1 Q. 5
So assume Option (b) of Q. 5 in Week 3 Assignment 1 to be .
Industrial Automation and Control: Week 2 Assignment 1 Solution Released
The solution link is available under Week 2 Module 2.
Industrial Automation and Control: Average Score of Week 2 Assignment 1
The average score of Week 2 Assignment 1 is 55.3.
Industrial Automation and Control: Average Score of Week 1 Assignment 1
The average score of Week 1 Assignment 1 is 75.7.
Industrial Automation and Control: Week 1 Assignment 1 Solution Released
The solution link is available under Week 1 Module 1.
Industrial Automation and Control: Mistake in Question 10 of Week 2 Assignment 1
Hello Everyone!
There is a mistake in Question 10 of Week 2 Assignment 1. None
of the answers are correct in that question. After the deadline (i.e., 07/02/2018
23:59 hrs) we will be ignoring this
question and re-evaluating the assignment for remaining questions.
Industrial Automation and Control: Week 3 Assignment 1
Hello Everyone!
Week 3 Assignment 1 has been released. The last date of submission is 14/02/2018.
Given below is the link for Week 3 Assignment 1 of Industrial Automation and Control.
https://onlinecourses.nptel.ac.in/noc18_ee12/unit?unit=86&assessment=164
Industrial Automation And Control : Week 3 Videos are available !!
Dear Students,
Week 3 Videos are available in the COURSE OUTLINE section under Week 3 !!
Feedback link for week 1 and week 2 is now available!!
REGISTER TODAY - CERTIFICATION EXAM FORM IS NOW OPEN!
Industrial Automation and Control: Week 2 Assignment 1
Hello Everyone!
Week 2 Assignment 1 has been released. The last date of submission is
07/02/2018.
Given below is the link for Week 2 Assignment 1 of Industrial Automation and Control.
https://onlinecourses.nptel.ac.in/noc18_ee12/unit?unit=81&assessment=151
Industrial Automation and Control: Regarding Assignment 0
Hello Everyone!
Those who have joined late
in this course, you may have missed the deadline for submission of Assignment
0. There is no need to worry if you have missed it. Assignment 0 was given to
brush up your knowledge regarding Analog electronics, Control System, Circuit
Theory and Digital Electronics. You can anytime revise those on your own.
Marks obtained in Assignment 0 will not be added to your
final score. All assessment will be
recorded from Assignment 1 onwards.
Industrial Automation And Control : Week 2 Videos are available !!
Dear Students,
Week 2 Videos are available in the COURSE OUTLINE section under Week 2 !!
Industrial Automation and Control: Forum tab on course page
Hello Everyone!
This is to inform you that Forum
tab on the course page have been renamed as "Ask A Question".
Industrial Automation and Control: Week 1 Assignment 1 is released
Hello everyone!
Assignment 1 of Week 1 has been released. The last date of submission is 05/02/2018.
Here is the link for Week 1 Assignment 1 of Industrial
Automation and Control
https://onlinecourses.nptel.ac.in/noc18_ee12/unit?unit=76&assessment=150
REGISTER TODAY - CERTIFICATION EXAM FORM IS NOW OPEN!
Industrial Automation And Control : Week 1 Videos are available now !!
Dear Students,
Week 1 Videos are available in the COURSE OUTLINE section under Week 1 !!
Assignment 0 is released
Dear Participants,
We welcome you all to this course. Please find Assignment 0 for this
course, which has been released just now. You are requested to solve all
fifteen questions contained in this assignment and check your answers.
Please also note that the marks obtained by you
in this assignment will not be added to the overall score for this
course. This assignment has been designed to help you to get prepared to attend this course.
We wish you all the best.
Prof. S. Mukhopadhyay and his team members
Welcome Email
Dear Candidate
Welcome to NPTEL Online Courses and Certification!
Thank you for signing up for our online course “Industrial Automation And Control". We wish you an enjoyable and informative learning experience.
The course will begin on Jan 22, 2018. When content is released on the portal, you will get an email alerting you. Please watch the lectures, follow the course regularly and submit all assessments and assignments before the due date. Your regular participation is vital for learning.
We will open registration for the exam soon after the course starts. A form has to be filled and the certification exam has a fee, which needs to be paid at the time of registration. Everyone who has signed-up for the course, including those who do not register for the exam, will continue to have access to the course contents.
There are two sections on the portal apart from the course content and assignment sections:
* The announcement list which will only have messages from course instructors and teaching assistants - regarding the lessons, assignments, exam registration, hall tickets etc.
* The discussion forum which is for everyone to ask questions and interact - If you have any questions regarding the technical content in the lectures, any doubts in the assignments or any question related to the exam, registration, hall tickets, results, etc, kindly write about this in the forum and the course instructor/TA will respond to it. Please use this well and participate to benefit from the course.
Details regarding the course:
Name of the Course : Industrial Automation And Control
Course url: https://onlinecourses.nptel.ac.in/noc18_ee12/
Course Duration: 12 weeks course
Date and Time of Exams: April 28 (Saturday) and April 29 (Sunday) : Morning session 9am to 12 noon;
Exam for this course will be available in one session on both 28 and 29 April.
Final List of exam cities will be available in exam registration form.
Exam registration url - Will be announced shortly
Once again, thank you for your interest in our online courses and certification. Happy learning - NPTEL team.
