Feedback for Control engineering

Dear student

We are glad that you have attended the NPTEL online certification course.

We hope you found the NPTEL Online course useful and have started using NPTEL extensively.

In this regard, we would like to have a feedback from you regarding our course and whether there are any improvements, you would like to suggest.
 
We are enclosing an online feedback form and would request you to spare some of your valuable time to input your observations. Your esteemed input will help us in serving you better.

The link to give your feedback is :


We thank you for your valuable time and feedback.

Thanks & Regards,
NPTEL Team

Control Engineering: All the best for the final exam!

Dear students,

We would like to wish you ALL THE BEST for the upcoming final examination for this course on Control Engineering. The syllabus and some general information for the final exam has been sent as an announcement earlier, and is available in the announcements section of the course.

Please make sure to carry all the required documents and essentials as mentioned in your hall tickets. Do read through the instructions present on your hall tickets and let us know if you have any queries regarding the same. 

We hope that you enjoyed learning the course as much as we enjoyed conducting it. Keep calm and do well! :)

Best regards,
Control Engineering Team

Control Engg: Assignment 12 Solutions

Dear Students,

Solutions for Assignment 12 have been released. Kindly check in Module 12 section to view and download the solution document.

Control Engineering: Clarification regarding lecture 53 on controllability and pole placement

Hi,

Please note the following change in lecture 53 (module 12) on controllability and pole placement:
At 00:40:52, the correct determinant formula is   
so that
 
Apologies for the mistake.

Control engineering: Clarification regarding Assignment 12

Hi,

Please note the following changes in questions 3 and 8 of assignment 12:
Question 3: Is the system in question 1 stable? (ignore the phrase 'closed loop').
Question 8: Please compute the open loop poles of the system for the given parameter values. It is incorrectly typed as 'closed loop poles' in the question.

Kindly note the above change before submitting your answers for assignment 12. Sorry for any inconvenience.


Control engineering - Reminder For Assignment

Dear Participants, 

The Due Date For Assignment 11 is already Closed.
Assignment 11: Submissions "770" 

We have received "164" submission for "Assignment 12"so far. 

The due date for the Assignment 12 is fast approaching. If you are yet to attempt it, do it at the earliest so as not to miss the submission deadline of "2018-04-22, 23:59 IST" also please note that the marks of the assignments will be considered in evaluation of the final grade.  

-NPTEL Team

Control Engg: Assignment 11 Solutions

Dear Students,

Solutions for Assignment 11 have been released. Kindly check in Module 9 section to view and download the solution document.

Control engineering : Hall ticket for April 28/29 NPTEL Online Certification exams is now available for download

Dear Candidate:

If you have registered and paid successfully for the April28/29 NPTEL Online certification exams, your Admit Card/Hall ticket is now available at http://nptelonlinecourses.iitm.ac.in/

Login with your registered Google-enabled account email id (used to access the course on the portal and used for registering for the exam) and its password to access the link. Click on April exam to download the hall ticket(s) for the April28/29 exams, from the link.

2. You can also download it from the alternate link given below:
https://cdn3.digialm.com//EForms/configuredHtml/885/54105/login.html  

Please try to access both the links to download your hall ticket: if you are not able to find your hall ticket in both the links, kindly write to us at nptelexam@nptel.iitm.ac.in
 
Note that you will be able to login here, only if you have a valid registration for exams on April 28/29, 2018. 

Please download hall ticket, take a print out and along with a original ID card, carry it with you to the exam venue (The exam centre address is displayed in the hall ticket). Read all instructions given in the admit card/ hall ticket carefully and follow them.
Download hall tickets for all the exams you have registered for - in case you don't get the hall tickets for any particular course, please write to  nptelexam@nptel.iitm.ac.in .

IMPORTANT:

1. Change of shift, course, exam center, exam city is NOT POSSIBLE.
2. You WILL NOT BE ALLOWED to write the exam if you are showing up at the exam center which is not allocated to you by mistake or by intention.
3. Candidates will not be allowed to write the exam without Hall ticket and proper id proof. Proof on the mobile phones or soft copy of hall ticket is NOT PERMITTED.

NPTEL Team wishes you the very best for the certification exam.

Control engineering - Reminder For Assignment

Dear Participants, 

We have received "294" submissions for "Assignment 11" and  "93" submissions for "Assignment 12" so far. 

The due date for the Assignment 11 and Assignment 12 is fast approaching. If you are yet to attempt it, do it at the earliest so as not to miss the submission deadline of "2018-04-15, 23:59 IST" (Assignment 11) and "2018-04-22, 23:59 IST" (Assignment 12)also please note that the marks of the assignments will be considered in evaluation of the final grade.  

-NPTEL Team

Feedback Week12 - Control engineering

Dear learner

Thank you for continuing with the course and hope you are enjoying it.
We would like to know if the expectations with which you joined this course are being met and hence please do take 2 minutes to fill out our weekly feedback form.
Would help us tremendously in gauging learner experience.



Thank you.
-NPTEL team

Control Engg: Experiments with Lego Kits

Dear all,

Some of you have asked for some demonstrations on hardware interfacing with MATLAB. Accordingly, we are posting a playlist on Youtube which has 3 demonstrations done by a student in the Control Lab at IIT Madras. The demonstrations include different experiments using LEGO kits which involves interfacing with MATLAB and Simulink.  

https://www.youtube.com/playlist?list=PLDP8WW6tCQbYzldfS7iFMv7SYh3lg0sKF

Control Engineering: Assignment 7 Re-evaluation

Dear Students,

Assignment 7 has been re-evaluated with a change in the answer for question 10. Question 5 has been removed from evaluation due to some technical issues.

You can check the updated marks in your progress page. The marks in the assignment page will not change. Do not be confused with the marks displayed in the assignment page.

Solution for the assignment was made available earlier. Match your answers with that. If there is any issue with the evaluation share the PDF page of your assignment and progress page by private email. Do not share it in the forum.

Control Engineering: Assignment 10 Re-evaluation

Dear Students,

Assignment 10 has been re-evaluated with changes in the answers for questions 2, 6 and 9. Question 9 accepts correct answers within the range 7.5-8.5.

You can check the updated marks in your progress page. The marks in the assignment page will not change. Do not be confused with the marks displayed in the assignment page.

Solution for the assignment is available now. Match your answers with that. If there is any issue with the evaluation share the PDF page of your assignment and progress page by private email. Do not share it in the forum.

Control engineering - Reminder For Assignment

Dear Participants, 

The Due Date For Assignment 10 is already Closed.
Assignment 10: Submissions "791" 

We have received "124" submissions for "Assignment 11" so far. 

The due date for the Assignment 11 is fast approaching. If you are yet to attempt it, do it at the earliest so as not to miss the submission deadline of  "2018-04-12, 23:59 IST" also please note that the marks of the assignments will be considered in evaluation of the final grade.  

-NPTEL Team

Control engineering - Reminder For Assignment

Dear Participants,

We have received "460" submission for "Assignment 10" and "72" submission for "Assignment 11" so far. 

The due date for the Assignment 10 and Assignment 11 is fast approaching. If you are yet to attempt it, do it at the earliest so as not to miss the submission deadline of "2018-04-07, 23:59 IST"(Assignment 10) and "2018-04-12, 23:59 IST"(Assignment 11) also please note that the marks of the assignments will be considered in evaluation of the final grade.  

-NPTEL Team

Control Engg: Assignment 9 Re-evaluation

Dear all,

There was some technical error in the marking for assignment 9 and as a result the scores which are scaled to 100 were being mis-calculated. This error has been sorted and re-evaluation has been done. So please note that there will be change in your scores (out of 100) for assignment - 9.

Week 11 - Feedback -Control engineering

Dear learner

Thank you for continuing with the course and hope you are enjoying it.
We would like to know if the expectations with which you joined this course are being met and hence please do take 2 minutes to fill out our weekly feedback form.
Would help us tremendously in gauging learner experience.



Thank you.
-NPTEL team

Control Engg: Release of Week 12 lectures and Assignment 12

Dear Students,

The content pertaining to Week-12 is live now.

We also released the slides for the week. In case there are any further queries, please post on the course forum and the TAs will try to answer them. While posting queries, please choose an appropriate category. If it a lecture related query, choose the pertaining Week of the lecture. If it is a assignment related query, choose the particular assignment. Otherwise choose the general category. 

The assignment-12 is also live. Please do not discuss the assignment solutions in the forum until the deadline ends. The threads will be immediately deleted if someone tries to do so. However, if you have some genuine queries related to lack of understanding in the assignment questions and questions alone, you are welcome to ask. 

Kindly note that the deadline for Assignment-12 is 22nd April 2018. There shall be no extensions to this deadline.

Control Engineering: Assignment 9 Solution

Dear Students,

Solution for Assignment 9 has been released. Kindly check in Module 9 section to view and download the solution.

Control engineering - Reminder For Assignment

Dear Participants, 

The Due Date For Assignment 9 is already Closed.
Assignment 9: Submissions "828" 

We have received "128" submissions for "Assignment 10" So far

The due date for the Assignment 10 is fast approaching. If you are yet to attempt it, do it at the earliest so as not to miss the submission deadline of "2018-04-04, 23:59 IST" also please note that the marks of the assignments will be considered in evaluation of the final grade.  

-NPTEL Team

Control Engg: Release of Week 11 lectures and Assignment 11

Dear Students,

The content pertaining to Week-11 is live now.

We also released the slides for the week. In case there are any further queries, please post on the course forum and the TAs will try to answer them. While posting queries, please choose an appropriate category. If it a lecture related query, choose the pertaining Week of the lecture. If it is a assignment related query, choose the particular assignment. Otherwise choose the general category. 

The assignment-11 is also live. Please do not discuss the assignment solutions in the forum until the deadline ends. The threads will be immediately deleted if someone tries to do so. However, if you have some genuine queries related to lack of understanding in the assignment questions and questions alone, you are welcome to ask. 

Week 10 - Feedback -Control engineering

Dear learner

Thank you for continuing with the course and hope you are enjoying it.
We would like to know if the expectations with which you joined this course are being met and hence please do take 2 minutes to fill out our weekly feedback form.
Would help us tremendously in gauging learner experience.



Thank you.
-NPTEL team

Control Engg: Final Exam - Syllabus and General Info

Dear all,

The syllabus for the final exam is as follows:
1) All the contents of Modules 1 - 7 
2) Module 10 : Only finding transfer function from Bode plot
3) Module 11: Different types of filters including their circuit realizations, transfer functions, cut off frequencies and bode plots
4) Module 12: Transfer function from state space models, canonical forms of state space models, controllability, observability, design of state feedback control and pole placement

General Info:
1) Modules 8 and 9 are NOT in the syllabus for final exam. 
2) There will be no MATLAB related questions in the exam. So you will not require MATLAB.
3) You can carry a non-programmable scientific calculator for the exam.
4) Revising the problems discussed in the lectures, tutorials and assignments will be helpful.

Control Engineering: Assignment 8 Solution

Dear Students,

Solution for Assignment 8 has been released. Kindly check in Module 8 section to view and download the solution.

Control engineering - Reminder For Assignment

Dear Participants, 

The Due Date For Assignment 8 is already Closed.
Assignment 8: Submissions "1025"

We have received "68" submissions for "Assignment 9" so far. 

The due date for the Assignment 9 is fast approaching. If you are yet to attempt it, do it at the earliest so as not to miss the submission deadline of "2018-03-28, 23:59 IST." also please note that the marks of the assignments will be considered in evaluation of the final grade.  

-NPTEL Team

Control Engg: Release of Week 10 lectures and Assignment 10

Dear Students,

The content pertaining to Week-10 is live now.

We also released the slides for the week. In case there are any further queries, please post on the course forum and the TAs will try to answer them. While posting queries, please choose an appropriate category. If it a lecture related query, choose the pertaining Week of the lecture. If it is a assignment related query, choose the particular assignment. Otherwise choose the general category. 

The assignment-10 is also live. Please do not discuss the assignment solutions in the forum until the deadline ends. The threads will be immediately deleted if someone tries to do so. However, if you have some genuine queries related to lack of understanding in the assignment questions and questions alone, you are welcome to ask. 

Control engineering - Reminder For Assignment

Dear Participants, 

We have received "169" submissions for "Assignment 8" and "12" submissions for "Assignment 9" so far. 

The due date for the Assignment 8 and Assignment 9 are fast approaching. If you are yet to attempt it, do it at the earliest so as not to miss the submission deadline of "2018-03-25, 23:59 IST."(Assignment 8) and "2018-03-28, 23:59 IST."(Assignment 9) also please note that the marks of the assignments will be considered in evaluation of the final grade.  

-NPTEL Team

Control Engg: Assignment 8

Dear all,

The deadline for assignment-8 has been extended to 25th March. Please submit the assignment before that. There will be no further extension.

Also note that in questions 9 and 10, there are minor typos referring to questions 7 and 8. Read them as 9 and 10 not 7 and 8. 

Week 9 - Feedback - Control engineering

Dear learner

Thank you for continuing with the course and hope you are enjoying it.
We would like to know if the expectations with which you joined this course are being met and hence please do take 2 minutes to fill out our weekly feedback form.
Would help us tremendously in gauging learner experience.



Thank you.
-NPTEL team

Control Engg: Release of Week 9 lectures and Assignment 9

Dear Students,

The content pertaining to Week-9 is live now.

We also released the slides for the week. In case there are any further queries, please post on the course forum and the TAs will try to answer them. While posting queries, please choose an appropriate category. If it a lecture related query, choose the pertaining Week of the lecture. If it is a assignment related query, choose the particular assignment. Otherwise choose the general category. 

The assignment-9 is also live. Please do not discuss the assignment solutions in the forum until the deadline ends. The threads will be immediately deleted if someone tries to do so. However, if you have some genuine queries related to lack of understanding in the assignment questions and questions alone, you are welcome to ask. 

Control engineering - Reminder For Assignment

Dear Participants, 

The Due Date For Assignment 7 is already Closed

Submissions For Assignment 7 is:"1360"

We have received "65" submissions for "Assignment 8"so far. 

The due date for the Assignment 8 is fast approaching. If you are yet to attempt it, do it at the earliest so as not to miss the submission deadline of "2018-03-21, 23:59 IST." also please note that the marks of the assignments will be considered in evaluation of the final grade.  

-NPTEL Team

Assignment 7

Hi,

If you get any answer as  in any question, please put in the string infinity.

Control engineering - Reminder For Assignment

Dear Participants, 

We have received "748" submissions for "Assignment 7" and "30" submissions for "Assignment 8" so far. 

The due date for the Assignment 7 and Assignment 8 are fast approaching. If you are yet to attempt it, do it at the earliest so as not to miss the submission deadline of "2018-03-17, 23:59 IST."(Assignment 7) and "2018-03-21, 23:59 IST."(Assignment 8) also please note that the marks of the assignments will be considered in evaluation of the final grade.  

-NPTEL Team

Last date for Exam registration extended till March 15, 2018 - 1 pm (Thursday) - Hurry up and register today!!

Dear Candidate,

Due to a technical issue, there was some problem with the exam form since yesterday. Now the issue has been fixed.

The last date for exam registration has been extended till March 15, 2018 - 1 pm (Thursday)

Last date for making the payment individually - March 16, 2018 - 1:00 PM (Friday)

If you have not yet registered for the exam, login to the form and apply for the exam today! If you have filled the form but not done the payment, Please complete the payment before March 16 1:00 pm.

Register for the exam today at: http://nptelonlinecourses.iitm.ac.in/

For other details about exam registration, please check our previous announcement.

NOTE:  NO EXTENSIONS BEYOND THESE DATES WILL BE GIVEN.

-NPTEL Team

Control Engineering: Assignment 6 Solution

Dear Students,

Solutions for Assignment 6 has been released. Kindly check in Module 6 section to view and download the assignment.

Control Engineering: Assignment 6 Re-evaluation

Dear Students,

In question number two both the options 'As  increases, the size of the lobes in the plot decreases' and 'As  decreases, the size of the lobes in the plot increases' are correct. So, the assignment has been re-evaluated considering both the answers as correct.

You can check the updated marks in your progress page. The marks in the assignment page will not change. Do not be confused with the marks displayed in the assignment page.

For question number 7 and 10, the corrections were posted and announced. The previous versions of these questions would lead to answers which does not match with either of the options provided. So there is no possibility in change of correct option(s). Hence no ambiguity for these questions will be considered.

Solution for the assignment is available now. Match your answers with that. If there is any issue with the evaluation share the PDF page of your assignment and progress page by private email. Do not share it in the forum.

Control engineering - Reminder For Assignment

Dear Participants, 

We have received "166" submissions for "Assignment 7" so far. 

The due date for the Assignment 7 is fast approaching. If you are yet to attempt it, do it at the earliest so as not to miss the submission deadline of " 2018-03-14, 23:59 IST." also please note that the marks of the assignments will be considered in evaluation of the final grade.  

-NPTEL Team

Control Engg: Release of Week 8 lectures and Assignment 8

Dear Students,

The content pertaining to Week-8 is live now.

We also released the slides for the week. In case there are any further queries, please post on the course forum and the TAs will try to answer them. While posting queries, please choose an appropriate category. If it a lecture related query, choose the pertaining Week of the lecture. If it is a assignment related query, choose the particular assignment. Otherwise choose the general category. 

The assignment-8 is also live. Please do not discuss the assignment solutions in the forum until the deadline ends. The threads will be immediately deleted if someone tries to do so. However, if you have some genuine queries related to lack of understanding in the assignment questions and questions alone, you are welcome to ask. 

Control engineering - Reminder For Assignment

Dear Participants, 


We have received "759" submissions for "Assignment 6" and "109" submissions for "Assignment 7" so far. 

The due date for the Assignment 6 and Assignment 7 is fast approaching. If you are yet to attempt it, do it at the earliest so as not to miss the submission deadline of " 2018-03-10, 23:59 IST"(Assignment 6)and " 2018-03-14, 23:59 IST"(Assignment 7) also please note that the marks of the assignments will be considered in evaluation of the final grade.  

-NPTEL Team

Assignment 6 due date extended

Dear Learners,

Assignment 6 have been extended till March 10, 2018.

-NPTEL

Exam and Certificate Format : Control engineering

Exam and Certificate Format 

Dear student

The certification exam will be conducted at designated centres in the city chosen by you. You have to register for the exam by filling up the form, paying the exam fee, appear in person and score >= 40% to get the certificate.

Register for the exam today at: http://nptelonlinecourses.iitm.ac.in/

Exam registration form closes on March 14, 2018 - 5 pm (Wednesday).

For other details about exam registration, please check our previous announcement.

Type of exam: Computer based exam 

You will have to appear at the allotted exam centre and produce your Hall ticket and Government Photo Identification Card(Example: Driving License,Passport, PAN card, Voter ID, Aadhaar-ID with your Name, date of birth, photograph and signature) for verification and take the exam in person. You can find the allotted exam center details in the hall ticket.

The questions will be on the computer and the answers will have to be entered on the computer; type of questions may include multiple choice questions, fill in the blanks, essay type answers, etc

The hall ticket will be available for download tentatively around 10 - 16th April 2018. We will notify the same through email.

FINAL CERTIFICATE:

The final score = 25% assignment score + 75% final certification exam score.

The final score will determine if you will/will not receive a certificate.

1. Final score < 40%: NO certificate

2. Final score between 40% -59%: Certificate of type "Successfully completing the course"

3. Final score between 60% -89%: Certificate with tag "Elite" printed at the top

4. Final score of 90% and above: Certificate with "Elite" tag and the gold medal printed on it.

Please click the link here for certificate format: https://goo.gl/ZogyXm

-NPTEL Admin

Week 7 Feedback - Control engineering

Dear learner

Thank you for continuing with the course and hope you are enjoying it.
We would like to know if the expectations with which you joined this course are being met and hence please do take 2 minutes to fill out our weekly feedback form.
Would help us tremendously in gauging learner experience.



Thank you.
-NPTEL team

Control Engineering: Assignment 6 Question 10

Dear Students,

The correct OLTF in Question 10 is 



(s+1) in the denominator is to be replaced by (s+10)

Last date for Exam registration extended - Hurry up and register today!!

Dear Candidates

Last date for exam registration has been extended till March 14, 2018 - 5 pm (Wednesday)

Last date for making the payment individually - March 15, 2018 - 5 PM (Thursday)

The certification exam will be conducted at designated centers in the city chosen by you. You have to register for the exam by filling up the form, paying the exam fee and appear in person to get the certificate.

Hard and soft copy of Certificate will be awarded only to those candidates who register for the exam, attend the certificate examination and whose Final score > 40%

Register for the exam today at: http://nptelonlinecourses.iitm.ac.in/

For other details about exam registration, please check our previous announcement.

-NPTEL Team

Control engineering - Reminder For Assignment

Dear Participants, 

The Due Date For Assignment 5 is already closed 

"2313" submissions for "Assignment 5",

We have received "211"submissions for "Assignment 6" and "62"submissions for "Assignment 7" so far. 

The due date for the assignment 5 , 6 and 7 are fast approaching. If you are yet to attempt it, do it at the earliest so as not to miss the submission deadline of for 5th 2018-03-03, 23:59 IST. ,for 6 th 2018-03-07, 23:59 IST. and for 7th 2018-03-14, 23:59 IST,also please note that the marks of the assignments will be considered in evaluation of the final grade.  

-NPTEL Team

Control Engineering: Assignment 5 Solution

Dear Students,

Solutions for Assignment 5 has been released. Kindly check in Module 5 section to view and download the assignment solutions.

Control Engg : Youtube Live Session 2

Dear all,

We are planning to have another live session on YouTube on 05-03-2018 (Monday) at 5 PM (IST). Here is the link to the live session. 

Similar to the last session, in this session, you can ask your queries by typing them down in the Youtube comments section and the Prof/TAs will try to answer them one by one. You can also give your feedback if any. We will post the link for the live session during the weekend.

If you have any queries about this live session, you can post them in the forum. 

Control engineering - Reminder For Assignment

Control engineering - Reminder For Assignment

Dear Participants, 


We have received "1798" submissions for "Assignment 5", "126"submissions for "Assignment 6" and "40"submissions for "Assignment 7" so far. 

The due date for the assignment 5 , 6 and 7 are fast approaching. If you are yet to attempt it, do it at the earliest so as not to miss the submission deadline of for 5th 2018-03-03, 23:59 IST. ,for 6 th 2018-03-07, 23:59 IST. and for 7th 2018-03-14, 23:59 IST,also please note that the marks of the assignments will be considered in evaluation of the final grade.  

-NPTEL Team

Control Engineering: Assignment 6 Question No. 7

Dear Students,

There is an error in Question No. 7 of Assignment 6. Given OLTF is 



Consider the OLTF as



instead of the one given in the assignment question. Apologies for the inconvenience caused.

Week 6 Feedback - Control engineering

Dear learner

Thank you for continuing with the course and hope you are enjoying it.
We would like to know if the expectations with which you joined this course are being met and hence please do take 2 minutes to fill out our weekly feedback form.
Would help us tremendously in gauging learner experience.



Thank you.
-NPTEL team

Control Engineering: Release of Week 7 lectures and Assignment 7

Dear Students,

The content pertaining to Week-7 is live now.

We also released the slides for the week. In case there are any further queries, please post on the course forum and the TAs will try to answer them. While posting queries, please choose an appropriate category. If it a lecture related query, choose the pertaining Week of the lecture. If it is a assignment related query, choose the particular assignment. Otherwise choose the general category. 

The assignment for Week-7 is also live. Thought we are releasing it a week early, the deadline will remain as per schedule.Please do not discuss the assignment solutions in the forum until the deadline ends. The threads will be immediately deleted if someone tries to do so. However, if you have some genuine queries related to lack of understanding in the assignment questions and questions alone, you are welcome to ask. 

Control engineering - Reminder For Assignment

Dear Participants, 


We have received "398" submissions for "Week5 Assignment 1" so far. 

The due date for the assignment 5 is fast approaching. If you are yet to attempt it, do it at the earliest so as not to miss the submission deadline of "2018-02-28, 23:59 IST." also please note that the marks of the assignments will be considered in evaluation of the final grade.

Control engineering - Reminder For Assignment


Dear Participants, 

Due date for assignment 4 is closed.

Submission for Assignment 4: completed 2759 .


We have received "245" submissions for "Assignment 5" so far. 

The due date for the assignment 5 is fast approaching. If you are yet to attempt it, do it at the earliest so as not to miss the submission deadline of " 2018-02-28, 23:59 IST." also please note that the marks of the assignments will be considered in evaluation of the final grade.  

Control Engineering: Assignment 4 Solution

Dear Students,

Solutions for Assignment 4 has been released. Kindly check in Module 4 section to view and download the assignment.

Control Engineering: Assignment 4 Evaluation

Dear Students,


Assignment 4 has been re-evaluated. Question 1 and 6 has not been considered for evaluation. The updated marks will be visible in the Progress page while the marks in the Assignment page will remain unchanged. At the end of the course, the marks in the Progress page will be considered. We regret for the inconvenience caused due to the errors.

MATLAB Online Access

Dear all,

Thanks to the support from MathWorks, a free license to MATLAB Online is available for the duration of this course.

 

To get started using MATLAB Online, please check the first lesson is the newly created MATLAB unit. It has the instructions to be followed to access MATLAB online.

 

MATLAB Online is supported in Chrome (recommended for best experience), Firefox, and Safari.

 

In case of any issues or questions related to MATLAB Online, please check the Forums. An engineer from MathWorks will be monitoring your questions in case you need help.

Control engineering - Reminder For Assignment

Dear Participants, 

Due date for assignment 1, 2 and 3 are already closed.

Submission for Assignment 1: 4013

Submission for Assignment 2: 3204

Submission for Assignment 3: 3019

We have received "494" submissions for "Assignment 4" so far. 

The due date for the assignment 4 is fast approaching. If you are yet to attempt it, do it at the earliest so as not to miss the submission deadline of " 2018-02-21, 23:59 IST." also please note that the marks of the assignments will be considered in evaluation of the final grade.  

-NPTEL Team

Week 5 Feedback - Control engineering

Dear learner

Thank you for continuing with the course and hope you are enjoying it.
We would like to know if the expectations with which you joined this course are being met and hence please do take 2 minutes to fill out our weekly feedback form.
Would help us tremendously in gauging learner experience.



Thank you.
-NPTEL team

Control Engineering: Release of Week 6 lectures and Assignment 6

Dear Students,

The content pertaining to Week-6 is live now.

We also released the slides for the week. In case there are any further queries, please post on the course forum and the TAs will try to answer them. While posting queries, please choose an appropriate category. If it a lecture related query, choose the pertaining Week of the lecture. If it is a assignment related query, choose the particular assignment. Otherwise choose the general category. 

The assignment for Week-6 is also live. Thought we are releasing it a week early, the deadline will remain as per schedule.Please do not discuss the assignment solutions in the forum until the deadline ends. The threads will be immediately deleted if someone tries to do so. However, if you have some genuine queries related to lack of understanding in the assignment questions and questions alone, you are welcome to ask. 

Week 4 - Feedback - Control engineering

Week 4


Dear learner

Thank you for continuing with the course and hope you are enjoying it.
We would like to know if the expectations with which you joined this course are being met and hence please do take 2 minutes to fill out our weekly feedback form.
Would help us tremendously in gauging learner experience.



Thank you.
-NPTEL team

Control Engineering :Video recording on Interactive session

Dear All,

There was an interaction session with some of the students for the course"Control Engineering"

The video recording is now available in the portal under the last unit"Interactive session with students"

Those who are interested can take a look.


-NPTEL Team

Control Engg: Assignments

Dear all,

Assignment-1 has been re-evaluated after changing the correct options in question no 19. Now, there are 3 right options for that question and you will get full marks only when all 3 are marked. Otherwise, you get only partial marks. So please note that depending on your answers, your scores for assignment 1 might have changed now.

Also, there are some clarifications announced in the forum for assignments 3 and 4. Please check them and submit the assignments accordingly. You can re-submit if you want to change your answers based on the clarifications. 
  

Control Engineering: Release of Week 5 lectures and Assignment 5

Dear Students,

The content pertaining to Week-5 is live now.

We also released the slides for the week. In case there are any further queries, please post on the course forum and the TAs will try to answer them. While posting queries, please choose an appropriate category. If it a lecture related query, choose the pertaining Week of the lecture. If it is a assignment related query, choose the particular assignment. Otherwise choose the general category. 

The assignment for Week-5 is also live. Thought we are releasing it a week early, the deadline will remain as per schedule.Please do not discuss the assignment solutions in the forum until the deadline ends. The threads will be immediately deleted if someone tries to do so. However, if you have some genuine queries related to lack of understanding in the assignment questions and questions alone, you are welcome to ask. 

Control Engg : Youtube Live Session Reminder

Dear all,

As announced earlier, we will have a live session on YouTube on 12-02-2018 (Monday) at 5 PM (IST). Here is the link to follow. 

In this session, you can ask your queries by typing them down in the Youtube comments section and the Prof/TAs will try to answer them one by one. You can also give your feedback if any. 

Control Engg: Solutions to Assignments 1 and 2

Dear all,

The solutions to assignments 1 and 2 have been uploaded. You can find them in the respective module content. There is one correction in Assignment-1. There are 3 options (check the solutions) which are right in the 19th question but only two options were marked right. This will be corrected in the portal next week and everyone who chose that option will get marks.

Clarification in Assignment 3: In question 4, there are certain options in which 2 minus signs are appearing one after the other. It is a mistake. So consider only one minus sign wherever you see two minus signs appearing side by side. Please re-submit the assignments if you want to change your answer. Post in the forum if you still have a doubt. 

Control Engg: Youtube Live Session

Dear all,

We are planning to have a live session on YouTube on 12-02-2018 (Monday) at 5 PM (IST). 

In this session, you can ask your queries by typing them down in the Youtube comments section and the Prof/TAs will try to answer them one by one. You can also give your feedback if any. We will post the link for the live session during the weekend.

If you have any queries about this live session, you can post them in the forum. 


Week 3 : Feedback

Dear learner

Thank you for continuing with the course and hope you are enjoying it.
We would like to know if the expectations with which you joined this course are being met and hence please do take 2 minutes to fill out our weekly feedback form.
Would help us tremendously in gauging learner experience.



Thank you.
-NPTEL team

Control Engineering: Release of Week 4 lectures and Assignment 4

Dear Students,

The content pertaining to Week-4 is live now.

We also released the slides for the week. In case there are any further queries, please post on the course forum and the TAs will try to answer them. While posting queries, please choose an appropriate category. If it a lecture related query, choose the pertaining Week of the lecture. If it is a assignment related query, choose the particular assignment. Otherwise choose the general category. 

The assignment for Week-4 is also live. Thought we are releasing it a week early, the deadline will remain as per schedule.Please do not discuss the assignment solutions in the forum until the deadline ends. The threads will be immediately deleted if someone tries to do so. However, if you have some genuine queries related to lack of understanding in the assignment questions and questions alone, you are welcome to ask. 

Week - 1 Feedback

Dear learner

Thank you for enrolling to this NPTEL course and we hope you have gone through the contents for this week and also attempted the assignment.
We value your feedback and wish to know how you found the videos and the questions asked - whether they were easy, difficult, as per your expectations, etc
We shall use this to make the course better and we can also know from the feedback which concepts need more explanation, etc.

Please do spare some time to give your feedback - comprises just 5 questions - should not take more than a minute, but makes a lot of difference for us as we know what the learners feel.



Thank you.
- NPTEL team

Week - 2 Feedback

Dear learner

Thank you for continuing with the course and hope you are enjoying it.
We would like to know if the expectations with which you joined this course are being met and hence please do take 2 minutes to fill out our weekly feedback form.
Would help us tremendously in gauging learner experience.



Thank you.
-NPTEL team

Control Engg : Release of Week-3 Lectures and Assignment-3

Dear Students,

The content pertaining to Week-3 is live now. The lectures are also available for download at http://nptel.ac.in/courses/108106098/.

We also released the slides and FAQs for the week. Please refer to them as well. In case there are any further queries, please post on the course forum and the TAs will try to answer them. While posting queries, please choose an appropriate category. If it a lecture related query, choose the pertaining Week of the lecture. If it is a assignment related query, choose the particular assignment. Otherwise choose the general category. 

The assignment for Week-3 is also live. Thought we are releasing it a week early, the deadline will remain as per schedule.Please do not discuss the assignment solutions in the forum until the deadline ends. The threads will be immediately deleted if someone tries to do so. However, if you have some genuine queries related to lack of understanding in the assignment questions and questions alone, you are welcome to ask. 

Control Engg : Release of Week-2 Lectures and Assignment-2

Dear Students,

The content pertaining to Week-2 is live now. We will continue releasing content a week earlier so that students get sufficient time for final exam preparation. We also released the slides and FAQs for the week. Please go through them as well. In case there are any further queries, please post on the course forum and the TAs will try to answer them. 

The assignment for Week-2 is also live. Thought we are releasing it a week early, the deadline will remain as per schedule.Please do not discuss the assignment solutions in the forum until the deadline ends. The threads will be immediately deleted if someone tries to do so. However, if you have some genuine queries related to lack of understanding in the assignment questions and questions alone, you are welcome to ask. 

Control Engg : Assignment-1

Dear Students,

Please note that the assignment for Week-1 is now live. We are also releasing this in advance for the benefit of those who would to start early. This is a purely objective assignment and is a very easy one to begin with. 

You can submit the assignment any number of times but only the final submission will be considered for grading. The assignment solutions will be given only after the deadline for submission ends. As we are giving more than sufficient time for the assignment, please do not expect any extension in the deadline. 

Please do not discuss the assignment solutions in the forum until the deadline ends. The threads will be immediately deleted if someone tries to do so. However, if you have some genuine queries related to lack of understanding in the assignment questions and questions alone, you are welcome to ask. 

Reminder 1:REGISTER TODAY - CERTIFICATION EXAM FORM IS NOW OPEN!

Dear Student:

Here is the much-awaited announcement on registering for the April 2018 certification exam. The registration for the certification exam is open only to students who have enrolled in the course.

Registration is open from 09th January 2018 (Tuesday) until March 07, 2018 10:00 AM (Wednesday). 
The certification exam registration URL is: http://nptelonlinecourses.iitm.ac.in/

(If you want to register for the exam for this course, login here using the same email id used to enroll to the course)

Dates of exam: April 28 and April 29, 2018 
Session: [Afternoon] For this course there is no ”Forenoon” Session.
You can register for a maximum of 4 course exams (same day of exam – 2 sessions. Same center will be allocated for both the sessions).

Exam Session time: Forenoon: 9.00 AM -12.00 PM ; Afternoon: 2.00 PM - 5.00 PM
Examination Cities: The exam is to be conducted in several cities across India whose list is available on the registration form. 

Click here to access the list of exam cities: http://nptel.ac.in/pdf/examcities_final.pdf
Registration fees: Rs 1100/-
(Students belonging to the SC/ST category can avail a 50% fee waiver - please select Yes for the SC/ST option and upload the correct Community certificate)
Students belonging to the PwD category can avail a 50% fee waiver - please select Yes for the option and upload the relevant Disability certificate.

Mode of payment:  Online payment - debit card/credit card/net banking or via SPOC of college

HALL TICKET:
The hall ticket will be available for download tentatively between 10 - 16th April 2018. We will confirm the same through an announcement once it is published.

Final score on certificate: 25% of assignment score + 75% of certification exam score.
Award of certificate:  Hard and soft copy of Certificate will be awarded only to those candidates who register for the exam, attend the certificate examination and whose Final score >= 40%

The final score, assignment score and exam score will be printed on the certificate. The certificate will also have a link to the NPTEL website (http://nptel.ac.in/noc), where on logging in, your scores and e-certificate will be available for verification  (Appropriate announcements will be made). Please do regularly submit assignments to get a good final score.

IMPORTANT NOTES

1) FOR CANDIDATES WHO WOULD LIKE TO WRITE MORE THAN 1 COURSE EXAM:- you can add or delete courses and pay separately – till the date when the exam form closes. No changes will be entertained after that.  

2) FOR CANDIDATES WHO ARE PAYING VIA THE LOCAL CHAPTER OF YOUR COLLEGE:- 

1. In the exam form, you will fill all the details and also upload photo, signature.
2. Ensure that you had selected your college name correctly from the drop-down list in the form.
3. Payment of exam fees - click on the tab - 'PAY VIA SPOC'.
The SPOC has to now confirm to NPTEL that he/she will pay fees on your behalf.
If the SPOC says NO, you will be intimated via email.
Then it becomes your responsibility to come back to the exam form and make the payment.
If you do not pay the exam fees within the prescribed time, you will not be able to write the exam.

Please read the instructions carefully before submitting the form.
In case of any queries please write to us at noc@nptel.iitm.ac.in

Thanks & Regards,
NPTEL TEAM

Control Engg : Release of Week-1 Content

Dear Students,

To facilitate an early orientation to MOOC stype courses and a peek into the teaching style for this particular course, we are releasing the first week lectures. You can start watching the lectures at a gradual pace until the course formally begins on 22nd January, 2018. The first assignment will be released a week early on 15th January but the deadline will be as per the course schedule.

As this a re-run course on NPTEL, all the lecture videos are available for viewing and download at this link.

Also we collected all the important queries that were asked and answered in the forums during the last run of this course. We will be releasing them now week-wise as FAQs for the week. Please go through them as well. In case there are any further queries, please post on the course forum and the TAs will try to answer them.

Hope you have a great learning experience.

Welcome to NPTEL Online Course: Control engineering

Dear Student,
Welcome to NPTEL Online Courses and Certification!
 


        

Thank you for signing up for our online course  Control engineering. We wish you an enjoyable and informative learning experience.

The course will begin on Jan 22,2018. When content is released on the portal, you will get an email alerting you. Please watch the lectures, follow the course regularly and submit all assessments and assignments before the due date. Your regular participation is vital for learning.
 
We will open registration for the exam soon after the course starts. A form has to be filled and the certification exam has a fee, which needs to be paid at the time of registration. Everyone who has signed-up for the course, including those who do not register for the exam, will continue to have access to the course contents.

There are two sections on the portal apart from the course content and assignment sections:

  • The announcement list which will only have messages from course instructors and teaching assistants - regarding the lessons, assignments, exam registration, hall tickets etc.    
  • The discussion forum which is for everyone to ask questions and interact - If you have any questions regarding the technical content in the lectures, any doubts in the assignments or any question related to the exam, registration, hall tickets, results, etc, kindly write about this in the forum and the course instructor/TA will respond to it. Please use this well and participate to benefit from the course.
     
Details regarding the course:
 
Name of the course: 
Control engineering
Course url: https://onlinecourses.nptel.ac.in/noc18_ee05/

Course duration: 12 weeks
  • Date and Time of Exams: April 28 (Saturday) and April 29 (Sunday) : Afternoon session: 2pm to 5pm
  • Exam for this course will be available in one session on both 28 and 29 April.
Final List of exam cities will be available in exam registration form.
Exam registration url - Will be announced shortly

 

Certificates from the IITs & IISc...

Once again, thank you for your interest in our online courses and certification. Happy learning - NPTEL team.


 


 

Welcome to NPTEL Online Course: Control engineering

Dear Student,

Welcome to NPTEL Online Courses and Certification!

Thank you for signing up for our online course " Control engineering". We wish you an enjoyable and informative learning experience.

The course will begin on 22 Jan 2018. When content is released on the portal, you will get an email alerting you. Please watch the lectures, follow the course regularly and submit all assessments and assignments before the due date. Your regular participation is vital for learning.

We will open registration for the exam soon after the course starts. A form has to be filled and the certification exam has a fee, which needs to be paid at the time of registration. Everyone who has signed-up for the course, including those who do not register for the exam, will continue to have access to the course contents.

There are two sections on the portal apart from the course content and assignment sections:
•    The announcement list which will only have messages from course instructors and teaching assistants - regarding the lessons, assignments, exam registration, hall tickets etc.     
•    The discussion forum which is for everyone to ask questions and interact - If you have any questions regarding the technical content in the lectures, any doubts in the assignments or any question related to the exam, registration, hall tickets, results, etc, kindly write about this in the forum and the course instructor/TA will respond to it. Please use this well and participate to benefit from the course.

Details regarding the course:

Name of the course:  Control engineering
Course url: https://onlinecourses.nptel.ac.in/noc18_ee05/
Course duration : 12 weeks

Date and Time of Exams: April 28 (Saturday) and April 29 (Sunday) : Afternoon session: 2pm to 5pm
Exam for this course will be available in one session on both 28 and 29 April. 
Final List of exam cities will be available in exam registration form.
Exam registration url - Will be announced shortly

Once again, thank you for your interest in our online courses and certification. Happy learning - NPTEL team.